Brake pipe p clips and connectors

[MikeB]

I need to order the bits and peices for the rigid brake lines for rear drums.
All I need at the minute is the bits to run the rear brake lines. So any help gratefully recieved.
What P clips are people using, size and spacing and where from?

Has anyone drawn up a list of all the connectors and parts?
I sketched up this diagram but wanted to add a parts list so if anyone has the sizes of the connectors and t pieces please let me know, If its useful I'll draw it up a bit better with a parts list.


http://i555.photobucket.com/albums/jj473/mjb22001/brakes.jpg

1. FR master cylinder connector - size - part number - supplier/price
2. FL master cyclinder connector
3. Rear master cyclinder connector
4/5 Brake Pressure Switch and T Piece and connectors
6.

[SeriesLandy]

1x 25ft reel 3/16 copper brake pipe
1 x Tee Piece (3 way union)
4x 10mm x 1mm female union
6x 10mm x 1mm (25mm long) male union
Brake pipe flaring tool

P clips, 5mm (think it was 4.8) from Maplin (http://www.maplin.co.uk/cable-p-clips-6236)
4 x flexi hoses

[AshG]

put the pressure sensor in the rear line. i had mine in one of the fronts and it created a pressure imbalance between the two front sides

[baz-r]

put the pressure sensor in the rear line. i had mine in one of the fronts and it created a pressure imbalance between the two front sides

thats an odd one all the rules say all hyd pressure is equal in the same circuit :confused:

[MikeB]

are the male unions longer than the standards ones on ebay?

e.g

these
http://cgi.ebay.co.uk/Male-brake-fittings-Metric-M10x1-Ford-Brembo-etc-/320669949372?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa96b1dbc

or these

http://cgi.ebay.co.uk/Male-brake-fittings-Metric-M10x1-Ford-Brembo-etc-/320670101850?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item4aa96d715a





the short ones seem to be standard

[SeriesLandy]

I used the one from the lower link, I have an assortment of sizes so picked the ones I felt were the correct length.