Hey All Noobie from Chester

[sven8t4]

Hey All!

Noobie from Chester embarking on an MX5 based project.

Been having a good nosey round at some of your build threads for info and insperation and come to the conclusion that I would like an MX5 based car which I can modify progressively as the build progresses.

As it as forum this thread will be pic heavy (but dont we all love pics!)

Donor
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/19385011_4X.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/19385011_3X.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/19385011_2X.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/19385011_1X.jpg

[Talonmotorsport]

Welcome to the forum, looks like you have started your way on the path to stress, frustraition, sleepless nights , painfull lows and even minor highs at times oh the joys of a self build car! I would get that stripped down to a bare shell ASAP as scrap steel prices are currently at £180 per 1000kg and increasing. What are your plans for improvements would these be along the lines of a turbo, super charger or both :D

[CTWV50]

Wow you live in Chester, that's not too far from me in Formby, I'm building an MX-5 car myself. Well done on getting a donor looks idea, is it a 1.6 or 1.8?Thanks for the tip off Talon, I didn't know "light Iron" was on it's way up again! Been stock piling for some months now.:D

[Twin]

Welcome Sven

I'm in chester too but my build is in work, Portsmouth (not much longer)

Twin

[skov]

Welcome to the forum. Nice choice of donor :cool:

[K4KEV]

welcome Sven....that donor looks fair tidy from the photo's it looks like you will get some good dollar off the likes of the roof, doors etc.....enjoy your build and keep us posted.

[sven8t4]

Hey All!

Thanks for the warm welcome!

Been on 3 trips to the scrappy today weighing in a Cat C 106 and a Lexus 430GS ( engine transplant in a Supra 3.0l straight 6 to 4litre V8) so I can concour that steel prices are good!

Should be collecting the MX5 next Mon or Tue. Its a 1.6 fairly tidy but has seen its days as a MAZDA..... lol

After build and rebuilding various Mini's, 306 Dturbo's, Volvo T5R's i'm familar with pain dont worry! just a nice little project out of the profits out of the last few Cat C/D rebuilds.

[monsterob]

welcome its quite fun here ! sounds /looks like you frequent the co part lot quite a bit ? did you ever see a white mini in there with a vtec engine smashed to bits ?

good luck with your build im in crewe and need excuses to get out on my bike if your ever stuck .

[TheArf]

Hi sven welcome to the funny farm, there are a few in your area, myself in wrexham along with Ayjay and leighroybrown in Flint. Drop me an email sometime and will help in anyway possible

The Arf

[sven8t4]

Didnt realise there were so many like minded mad men in the cheshire/ wrexham area! I'm going to be doing the build at work in Wrenbury (Nr Nantwich) well it would be rude not to use their power!

[twinturbo]

Welcome :)

TT

[SeriesLandy]

Welcome Sven

I'm in chester too but my build is in work, Portsmouth (not much longer)

Twin

I didnt know ur in Portsmouth, twin. I'm only in rowlands castle.

[wylliezx9r]

Welcome mate there's a wealth of knowledge and plenty of enthusiasm here :)

[Twin]

I didnt know ur in Portsmouth, twin. I'm only in rowlands castle.

I pass there on my way home every weekend, I'm in Gosport for my sins!

[sven8t4]

Well first part ordered today......

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=120706690616&ssPageName=STRK:MEWNX:IT

Its not much but its the start! and cleared the Workshop out at work ready to paint the floor and build the build table!

[ayjay]

Dont go mad or you'll have the costs spiralling out of control in no time:eek: :eek:
Dont forget to put it on the spreadshit--sorry shite--I mean sheet:D

[ayjay]

Hey I've just noticed I've become a SENIOR member of the forum---HOW COOL IS THAT:D

I think i deserve now to be able to post advice without fear of contradiction:)

Anyone need advice on

1 Welding
2 Workshop practices and materials
3 Precision Engineering
4 Inhaling strange substan----------:p

Sorry got a bit carried away with fame:D

[sven8t4]

Another purchase today http://cgi.ebay.co.uk/3-WELDING-MAGNET-MAGNETS-DEDICATED-ANGLES-25-50-75LB-/190548822498?pt=UK_Hand_Tools_Equipment&hash=item2c5d9849e2

Set of Welding magnets....bound to come in handy... and managed to blag work into sending me on a welding course ( can all ready weld but nothing like having a certificate too at their expense! )

Table should be built tomorrow ;o)

Tues/Wed collect the MX5 Donor then speak to Andy about an MX5 based flat pack :)

[robo]

We use them they are really handy. Keep them wrapped up in cloth because every bit of swarf within 75 miles seems to find its way on to them and they are a fxcker to keep clean. Dont try weld to close them either as they throw the weld.

Bob

[sven8t4]

Hey Bob,

Cheers for that I'll bear that in mind.....aswell as not putting my mobile near them..... made that mistake once! D'oh!

[leroybrown911]

Welcome Sven!

A lot of people on here willing to help you out with any queries, I am sure you will enjoy your build.

I am from wrexham but now live a short distance from Chester, in Holywell!


Cheers
Leigh

[james3004]

Welcome to the forum :)

[sven8t4]

Won my donor from Copart £375....now as soon as the MX5 chassis is ready as a flat pack that'll be winging its way to work too! :)

[james3004]

Do you get a v5 with it? Or are you going for a q plate?

[sven8t4]

I'll get the V5 :)

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00100-20110719-1507.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00097-20110719-1430.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00098-20110719-1453.jpg

[twinturbo]

I wish they would not use fork lifts on salvage cars, damages all sorts. My Cat C Galaxy has crushed sill, crushed water pipes and a crushed fuel tank. and the real damage was a low speed impact that damaged the front bumper and rads.

TT

[sven8t4]

Well 'Evey' is at work in the workshop, and after a quick go over withsome TFR its looking good.... get the spanners out andstart takign apart tomorrow!

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00101-20110719-1809.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00108-20110719-1903-1.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00102-20110719-1847.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00105-20110719-1848.jpg

[sven8t4]

Time to start converting this in to the dash!

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00132-20110724-1635.jpg

Does anyone know of a template for the dash?

[sven8t4]

Quick update,

VIN letter written and posted ( from this site )

Interior coming out ( in work and *supposed* to be working )

More bits listed on ebay.

[sven8t4]

VIN number arrived from the DVLA in less the 48hrs?!?!?! I was shocked!

Just need the chassis now to stamp it onto..... Where is the standard place? Think the manual says it must be on the offside but doesnt say where?

Sven ;)

[sven8t4]

Ordered my Chassis!!!!!!!! :) :) :)

[poshguy]

where have you ordered the chassis from if you dont mind me asking

[sven8t4]

Andy at Saturn ;)

[sven8t4]

Todays progress!

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00158-20110730-1749.jpg

[sven8t4]

Todays progress

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0283.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0284.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0285.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00164-20110801-1426.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00165-20110801-1621.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00166-20110801-1621.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0290.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0291.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0292.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0294.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0295.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0296.jpg
Had to Be done :p

[ayjay]

By 'eck that was fast work you dont hang about:D

[sven8t4]

Well fingers crossed Andy's cutting and dispatching the chassis kit anytime soon so need the space! Ebay everything left over tomorrow (day off although will be at work). Then its time to sort out what I need and what can go....and weigh the tub in.

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0300.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0297.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0302.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0301.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0309.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0308.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0311.jpg
All Working Hard! ha!

[skov]

Nice work!
Stick a couple of seats on there and you're done :D

[ayjay]

Sticking the shell on the boat trailer is just brilliant---why didnt I think of it

[sven8t4]

Just for you AyJay!

http://i307.photobucket.com/albums/nn312/sven_2k4/Amys%20Escort%20Cabriolet%20rebuild/DSC03931.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Amys%20Escort%20Cabriolet%20rebuild/DSC00085.jpg

I've done it before when I completely rebuilt the ex's Escort Cabriolet.
Escort (http://s307.photobucket.com/albums/nn312/sven_2k4/Amys%20Escort%20Cabriolet%20rebuild/)

[twinturbo]

Good start there.

TT

[sven8t4]

Well another day another update. Engine mounts arrived in the post along with my shiny new VIN plate. Then spent the rest of the day with a razor blade and a pair of wire cutters chopping the crap out of the MX5 loom. Quite surprised how little useless crap was in there, but as it doesnt have AC, ABS,TRACS or any of that other rubbish the loom is pretty straight forward and basic

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0341.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0340.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0339.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0338.jpg

[sven8t4]

Todays update........

Bye Bye MX5!!

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00179-20110804-0949.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00180-20110804-1020.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00181-20110804-1020.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00182-20110804-1020.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00183-20110804-1020.jpg

Gone :)

[spud69]

Cool log Sven, put a smile on my face.

Keep it up should keep us amused.

Cheers....Andrew

[sven8t4]

Cheers Spud!

I'm terrible for taking loads of random pics, but as long as people enjoy them I'll keep adding them :)

Think this afternoon will be spent in the dry in the workshop setting the welder up :)

Sven

[ayjay]

That engine in the LH corner of your workshop looks the biz for a roadster:eek:

[sven8t4]

the 3.5 Lexus V8? haha thats going in my mates Supra to replace the 3.0 straight 6 ;)

[sven8t4]

Chassis arrived.......

Build table built......

Frame laid down!!! :)

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0492.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0493.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0494.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0495.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0496.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0497.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00397-20110918-1215.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00398-20110918-1319.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00399-20110918-1341.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00400-20110918-1342.jpg

Todays Progress :)

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00405-20110919-1543.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00407-20110919-1559.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00410-20110919-1640.jpg

[will_08]

Looking awesome Sven, i like your build table :cool:

[Davey]

Looking very good there but you really ought to unwind that extension lead off the drum. Drawing the kind of power a welding set does it can get hot enough to catch fire like that. I have seen one go up in smoke before and its a bit scary, also the fumes from the burning insulation are pretty noxious.

D.

[sven8t4]

Cheers Muchly!

yeah waiting on a 16amp plug so i can plug it straight into the socket in the wall thats there. In the mean time I'll unwind it!

Any ideas on the orientation of U4 and U5 as to which direction the 5degree angle should face?

[twinturbo]

Is that table braced at all?

I always forget to unwind my extension, despite knowing the reason and telling people off for running 3 TEA urns off a coiled lead many times..

TT

[sven8t4]

yup welded frame underneath :)

[will_08]

Just keep it coiled, keep the chill off the air, save you needing any additional heaters :)

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0498.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0502.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0503.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0505.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0507.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0508.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0509.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0511.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0512.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0513.jpg

Well thats it for today :)

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0514.jpg

Well thats it for today :)

[sven8t4]

Todays progress.....

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0515.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0518.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0519.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0521.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0523.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0524.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0526.jpg

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0529.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0530.jpg

So that's it for today.....

[twinturbo]

Some super progress, well done.

[sven8t4]

Cheers :)

coming along nicely although SSC's chassis plates dont come numbered.... got a bit confused this afternoon lol

[Talonmotorsport]

I hope you have not welded straight on top of the black scale of the tube and that it has been given a 45' weld prep on all the joints.

[skov]

Looking good :cool:

You might want to remove TR5 though, I'm pretty sure it interferes with the intake manifold on the MX5 engine.

[sven8t4]

Hey Skov,

I'll be lifting the frame over the engine tomorrow so i'll whip out TR5 if its catching :)

Sven

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0541.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0542.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0544.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0545.jpg

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0546.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMAG0547.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/IMG00439-20110925-1716.jpg
Rolled over and welding the underneath and hidden welds.

When SSC releases their updated build guide I'll start welding the CP plates on

[skov]

Hey Skov,

I'll be lifting the frame over the engine tomorrow so i'll whip out TR5 if its catching :)

Sven

I wouldn't recommend putting the frame over the engine. It will go, but it's a total pig. It's very tight and will only fit over at a funny angle.
If you do go that way whip the exhaust manifold and the intake support bracket off before you start - it's a lot harder to remove them whilst holding the chassis above the engine with your other hand :rolleyes:
Good luck!

[sven8t4]

http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/289609_10150351836708258_509673257_8036299_3946184 5_o.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Haynes%20Locost%20Build/330596_10150351836923258_509673257_8036303_2077324 974_o.jpg
Back on track :)

[sven8t4]

Hey all Looooooooong time no see!!

After a few 'problems' at work my build got moved to my garage and sat there for 6 months.

Now I'm back into it full of enthuisasm once more.
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/420983_10150648436483258_509673257_9066140_1501107 99_n.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/420458_10150648436093258_509673257_9066137_1276512 927_n.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/422797_10150644796458258_509673257_9056013_1858265 043_n.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/423475_10150642534703258_509673257_9049940_3752497 16_n.jpg

[ayjay]

Welcome back. Glad to see you are motivated again;)

[sven8t4]

Yeah back into it in a big way. With some help from Skov I've knocked up a set of engine monunts that I'll test fit tonight and tack weld in place. I'm using 4mm plate on the flat surfaces and 6mm for the 'legs' although may swap the plate for thicker but havent decided yet so any thoughts on this would be helpful.

[sven8t4]

Well quick session with the weld and out pops a set of trial fit engine mounts

http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/425856_10150654567318258_509673257_9088413_1874909 099_n.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/429215_10150654566773258_509673257_9088412_1564969 287_n.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/427765_10150654566153258_509673257_9088411_1227488 033_n.jpg

[sven8t4]

not sure about the alignment though and may have some clearence issues to work round....
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/426335_10150654568578258_509673257_9088416_9933462 86_n.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/428602_10150654568118258_509673257_9088415_1576210 160_n.jpg
http://i307.photobucket.com/albums/nn312/sven_2k4/Facebook/Haynes%20Locost%20build/428172_10150654567773258_509673257_9088414_1284109 437_n.jpg

Any suggestions on a measurement to the crank pulley bolt from either side of the chassis?

[ayjay]

I ended up with elongated oval holes in my engine mounts to get the alignment right:o

[sven8t4]

Think i may well end up doing the same.....

Started on the wishbone mounts yesterday with some threaded bar to get the alignment right.... my least favorite bit so far, really worry about getting them in the wrong place and the car is going to forever scrub tyres and crab. Granted I'd have to get it pretty far out to do that but still....

Also has anyone got a measurement from the center of the MX5 crank bolt to the chassis for reference on the alignment?

Steve

[CTWV50]

You should check out john's (skov) build thread and gallery. I think you'll be needing to take TR5 out. and lower it at least 40mm if it's a 1.6.

[sven8t4]

Hey, yeah I'm in frequent contact with Skov picking his brain but thanks ;)