Thread sizes..

[twinturbo]

I need to order some nuts to temporarily fix my bottom ball joint and track rod ends.

Any Ideas what the thread size is for these..

TT

[Wynand]

Im using the Transit ball joint and Escort mk2 rack and just measured the rack end thread; M14 (diameter) x 2.0mm (thread.)
Hope this helps:)

[Talonmotorsport]

I presume you are talking about the nylocs or castle nuts that hold the track rods and the ball joints IN TO the bottom of the upright and the mushroom? I have a thread gauge and zeus book at the shop I'll check later, the tapers will be the same as the OE parts obviously how ever I can't say the same for the threads.

[ozzy1]

Steering rack M14 x 2mm
Transit drag link M18 x 1.5mm and M12 x 1.5mm
Maxi balljoint M12 x 1.25

[baz-r]

do what i do just add a stack of washers to stop the nylon ring touching simples :D