Flatpack Chassis supplies

[HandyAndy]

I,m pleased to announce that as an addition to my Flat Pack Chassis Kits I am now able to supply the following....

Full CP plate kits ( CP1 to 25 ) = £70.00 + £10.00 postage

Wishbone Brackets
} Full set = £28.00 + £5.50 postage
Shock Absorber Brackets

Diff mounting Brackets = £17.00 + £7.50 postage

Engine Mount plates = £9.50 + £5.50 postage

Gearbox Mount plates = £4.50 + £3.00 postage

SS1 plates = £5.50 + £3.00 postage

I will also be soon adding to this range with flatpack pedal box & Rear upright kits.

All parts will be "Waterjet Cut", from new steel, each piece indvidually marked with its "part code" ( how easy is it to mix up the wishbone / suspension brackets :eek: ) & all supplied to "Book Spec" or alternative amended upgrades etc to suit .

I will add the costs shortly, tho I will say that I.m trying very hard to keep the costs down & will also offer various "Package" prices.


cheers
Andy

[BenBrooks]

hi andy,

I'd be interested in the rear upright kit. would you be doing fully fabricated ones? i'm not being lazy i just trust a professionals welding more than my own on stuff like the uprights/wishbones. also would you have any of the bushes for the pedal box and the actual pedals? i've done the pedal box/am doing it but the actual pedals and bushes look a bit to complex for my jigsaw!

thanks

ben

[twinturbo]

All parts will be "Waterjet Cut", from new steel,


Them B'n'Q Preasure washers really are a bargain :D :D :D




Seriously...

Good on ya and best of luck.

TT

[HandyAndy]

hi andy,

I'd be interested in the rear upright kit. would you be doing fully fabricated ones? i'm not being lazy i just trust a professionals welding more than my own on stuff like the uprights/wishbones. also would you have any of the bushes for the pedal box and the actual pedals? i've done the pedal box/am doing it but the actual pedals and bushes look a bit to complex for my jigsaw!

thanks

ben

Hi Ben,

The next addition to the range of products I,ll be supplying will be the Rear upright Kits & Pedal boxes & yes will be offering fully fabricated kits too, but not just yet ( not far away tho ).

If you are struggling with certain pieces of the pedal box then let me know which parts you need & I,ll just supply each piece you need to complete your own pedal box, & yes will also be offering the bushes too ( but the upright kits & pedal box are "phase 2 " of my current supplies & not ready for despatch just yet as full kits).

Send me a PM if you think I can help.

cheers
andy

[BenBrooks]

cheers for the heads up. i'll keep an eye out
Ben

[Oscar]

Great news, Will keeping an eye open for when I come to needing (and being able to afford) rear uprights.

[vmax1974]

Hi andy will work out what I need and get in touch tomorrow

[HandyAndy]

Great news, Will keeping an eye open for when I come to needing (and being able to afford) rear uprights.

No Probs,
I,ll update this thread with costs & progress when / as parts become available ready for despatch etc .

cheers
andy

[BenBrooks]

Andy not sure what's going on with my messages but pm replied..

[HandyAndy]

TT...cheers mate :) but you weren,t far wrong...I DO need a new pressure washer......for the footpath :D

Vmax.....No worries , let me know when good for you .

Ben.....:confused: I,m as confused as you are ,,,,PM replied to too:D

cheers
andy

[SeriesLandy]

It's great to hear you are filling the missing parts gap!
Are you keeping cp16? (drivers bulkhead) 3mm as its worth mentioning. Rather than book 1mm.

[HandyAndy]

It's great to hear you are filling the missing parts gap!
Are you keeping cp16? (drivers bulkhead) 3mm as its worth mentioning. Rather than book 1mm.

Thanks Steve,:)

As alot of the "older" members :p will no doubt know theres always been other suppliers offering alot of the parts needed & I,ve never wished or intended to "step on anyones toes" so to speak , but would like to supply these new parts as an option to any current or future builders to help them progress their build if they don,t wish to make them themselves.

Yes, CP16 will be supplied in 3mm steel rather than the suggested book spec 1mm.

Thanks for the thumbs up Steve :)

cheers
andy
ps...need to change my signature now

[vmax1974]

Pm sent regarding everything I need

Many thanks

[motomaniac]

ey up andy, u gonna start doing welded up chassis's now?? for people nearby.. ahem..:rolleyes:

[TheArf]

Will keep a lookout for the rear up-right kit Andy, the only person I can find offering these as a kit is rogue engineering and i'd rather cut them out with my teeth than part with my hard earned to him so dont forget to post when you have these kits ready mate as I will be ordering one

Arfon

[ozzy1]

the only person I can find offering these as a kit is rogue engineering and i'd rather cut them out with my teeth than part with my hard earned to him

Dont understand why. Ive bought parts from him and its all good quality and not badly priced and he will even post it out here which a lot of people wont.

[TheArf]

You did well it took a lot of back and too and a few well chosen promisses of ill health for me to get my parts delivered to north wales never mind overseas

Arfon

[vmax1974]

Any news on the chassis plate kits and suspension brackets yet andy

[HandyAndy]

Any news on the chassis plate kits and suspension brackets yet andy

Sorry for the delay, been feeling a little unwell for a few days :(

I,ve added the prices to the first post on this thread .

Info on the upright kits & Pedal box kits will follow in next few days:)

cheers
andy

[BenBrooks]

pm sent about some stuff (again) cheers Andy

[HandyAndy]

pm sent about some stuff (again) cheers Andy


Hi Ben,
apologies for the slow reply, actually had a fun weekend away with the kids , wife decided as it was nice weather to have some "family time " :eek: :D

PM replied to, & many thanks.

cheers
andy