Hoses

[tkpm]

Hi all,
I'm about to start on my cooloing system.
But i have a question, on my pinto water pump, there are two outlets one large and small.
I know the large goes to the rad, but where does the other go to?

Terry

[robo]

Thats the return from the heater matrix.

Bob

[tkpm]

I take it i just blank it off then?

Thanks robo

Terry

[robo]

I cant remember if the pinto has an internal bypass. if not you will have to loop it into the heater feed to for the bypass.

bob

[SeriesLandy]

Mine goes from there round the back of the block to the inlet manifold.
If you plan on using no standard carbs then give ashg a pm or look on his pics to see what he did. HTH