Hazard lights
 

Bit of a tangent to the conversation, but i have purchased the pedal box from CBS, but the accelerator pedal does not offer enough movement to fully extend the throttle cable. I have instead built a new accelerator pedal which now does the job, but is bigger then i wanted it to be, but needs to be this size to allow the throttle cable to fully extend.
Has anyone got any pictures of a similar set-up that works?

You could make a smaller pulley at the throttle body end and keep the original pedal.



Cheers
Stot

That's a good idea, is that what you did? does it work alright?

I havent done it yet but I will if I dont like the travel. I made my own pedal box and I think the travel is ok.

Cheers
Stot

Hazard light
 

Well after further investigation i have found that the hazards use a fuse called BTN2 which is in the main fuse block. Underneath this, i do not have anything connected and i have an empty socket, but i cant find any plugs that fit it.

Any suggestions what should be connected to this socket?

I will have a look in my fusebox tonight and see what is in there.

you might need to go on ebay and buy one

Hazard Lights
 

Ye that's what im thinking, i just don't know what loom is meant to be connected to that socket.