Thats an excellent write up of how to go about it, Enoch. Makes me feel like I would be able to do it, but I've already asked Alan at Premier to make me up a loom. It will free me up some time to work on other parts of the build and hopefully make for a nice easy installation.

I've also been persuaded by a few friends that have popped over to see the build to buy a digidash (I had planned to use the standard Sierra dials), so I'll need to wire that in and make up the loom for megajolt and associated sensors, so still a bit of wiring to get my head around!

One of the things that was putting me off was the number of different colour wires to buy, seemed like a mine field, until I read a guide that suggested only using black wire, and use bands of coloured shrink wrap at each end for identification.

Cheers
Stot

Hm, I tore apart the donor loom and ended up with lots of different colored wires to make my new one.

That was the other idea but 25+ year old wires are already broken down an amount, often I strip wires and there is black oxide layers on the copper.

Cheers
Stot

Anybody if and how you can get rid of bulb failure relay from the Sierra loom.:eek:

Bit the bullet and got the Tiger one,not as expensive as others and good quality,service was good too next day delivered and as they use Sierra bits it wont take a lot to sort.