Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)
-   -   Pinto Wiring (http://www.haynes.co.uk/forums/showthread.php?t=2497)

twinturbo 5th March 2012 05:56 PM

The 1.8 Pinto was the only one to have the alternator with the feed for the carb, there must have been a reason for it.

I am hopefully getting a 1.8 Pinto for Build2. But it may have no ESC module which will be a pain.

TT

SeriesLandy 5th March 2012 11:13 PM

Apparently the alternator output has a lower voltage output (read on fordification.com) but can't find anything to back it up.

twinturbo 6th March 2012 07:31 AM

The 2e2 on the MK2 golf just runs off a 12V supply with a thermo switch so not sure on the voltage thing.

TT

davidimurray 6th March 2012 08:04 PM

Twin - what bits are you after? Will have to have a dig in the garage but I may still have the bits that came off my Pinto.


All times are GMT +1. The time now is 07:58 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.