Haynes Forums - CVH mounting

Page 2 of 2

Show 40 post(s) from this thread on one page

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)

- - CVH mounting (http://www.haynes.co.uk/forums/showthread.php?t=3370)

HandyAndy

6th January 2010 04:53 PM

Quote:

Originally Posted by GraemeWebb (Post 28494)

Ive just ordered a pair of these engine mountains but does anyone have the dimmensions, ie height and diameter so I make a pair of dummy units and can crack on with engine mounting before they arrive.

75 mm diameter
37mm depth

not including the mounting bolt thread.

hope this helps.
cheers
andy

GraemeWebb

6th January 2010 05:17 PM

Quote:

Originally Posted by HandyAndy (Post 28495)

75 mm diameter
37mm depth

not including the mounting bolt thread.

hope this helps.
cheers
andy

Thanks Andy

Cheers

Graeme

Matthew

6th January 2010 10:02 PM

I've a pair of those in the post from the same seller after one of the originals fell to pieces removing it from the donor last weekend. Looked on eBay for Sierra ones and nearly fell off my chair - over £100 for a pair of shiny ones, or £88 for a single genuine Ford one. Someone's taking the mickey.

Matt

dogwood

7th January 2010 08:59 AM

Quote:

Originally Posted by Matthew (Post 28507)

Looked on eBay for Sierra ones and nearly fell off my chair - over £100 for a pair of shiny ones, or £88 for a single genuine Ford one. Someone's taking the mickey.
Matt

Now ther's a plan, may be I'll put mine on Eblag.
Buy a set of Landy ones and have change left

David

All times are GMT +1. The time now is 12:23 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page