Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   what suspension? (http://www.haynes.co.uk/forums/showthread.php?t=3890)

flyerncle 19th March 2010 02:59 PM

Use something to mock up the shockers the same diameter and length and put it in place and see what it looks like and this will give you some idea of what will fit,plastic drain pipe ?:)

layotn20 19th March 2010 03:01 PM

Quote:

Originally Posted by flyerncle (Post 34401)
Use something to mock up the shockers the same diameter and length and put it in place and see what it looks like and this will give you some idea of what will fit,plastic drain pipe ?:)

cheers m8 nice 1 :)

flyerncle 19th March 2010 03:04 PM

Anytime dude :D

Tilly819 19th March 2010 09:38 PM

just out of intrest were does the lower section of the steering collum come in relation to the off side shock with the inboard setup...there carnt be much room for it

chears tilly

layotn20 20th March 2010 08:25 PM

isn't to bad mate as the suspension bolts in the middle of the chassis at the bottom about 5/6 inches behind the steering rack. and the colum is rite over in the off side corner, if that makes any sense to you :rolleyes:

dogwood 21st March 2010 07:39 AM

Quote:

Originally Posted by layotn20 (Post 34344)
so as long as i buy 4 dampers that are 13" open il be ok?? im having 250lb springs on front and 300/350 on back.

Wrong way around.. 350's at the front, unless you are using a bicycle engine

layotn20 21st March 2010 11:21 AM

Quote:

Originally Posted by dogwood (Post 34532)
Wrong way around.. 350's at the front, unless you are using a bicycle engine

using a zx9r engine. so 350 on front?


All times are GMT +1. The time now is 01:21 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.