Haynes Forums - Spikehaus First Tear Drive!

Page 2 of 3

Show 40 post(s) from this thread on one page

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Announcements (http://www.haynes.co.uk/forums/forumdisplay.php?f=2)

- - Spikehaus First Tear Drive! (http://www.haynes.co.uk/forums/showthread.php?t=5781)

AshG	29th January 2011 11:17 PM

well done spike another milestone reached.

Dave & Ronnie WHAT IS WRONG WITH MY DRIVING? it was only a 1.6 pinto when i took you guys out in it you wait until stoneleigh this year, you wont have time to poop your pants as you will be too busy trying to prise you eyeballs out of the back of the seat.

dogwood

30th January 2011 09:20 AM

Quote:

Originally Posted by AshG (Post 52298)

WHAT IS WRONG WITH MY DRIVING?
you wait until stoneleigh this year, .

Well if you don't know...
tunnel....blue flashing lights......ring any bells ?????? ;)

You aint going to get me near you're car with the new engine...:eek:
BTW I'm going to be checking up on you're build in the next couple of weeks.
So expect a surprise visit...:cool:

DaddyA

31st January 2011 09:04 PM

Nice one Nick,

looking good. Been round yours a couple of times (alll locked up), have to come round for a closer look and a listen to that engine.

Wgroove

1st February 2011 02:19 PM

Fantastic job Mister Spikehaus !
Nice pics too.
Where did you bought your propshaft, underneath te pics is written NWP.
Is this a company in the UK ? Could you send me some info ?

Thanks,

Hoping to get my roadster soon on the same level as yours !

Regards,

Wim

Bonzo

1st February 2011 02:43 PM

Hello Wim

NWP are a UK based company, here's a link to their web site :)

North West Propshafts

Spikehaus

1st February 2011 04:23 PM

Quote:

Originally Posted by Bonzo (Post 52461)

Hello Wim

NWP are a UK based company, here's a link to their web site :)

North West Propshafts

Looks like that one has been answered, my prop was a heavy duty version so it cost a bit more, about £120 delivered, it was sent overnight courier!

For info it was:

700 mm L x 50.8 mm Dia Propshaft, 35 mm dia x 25 Teeth Sleeve, 4 Bolt flange

I am sure they will help you out,

Daz,

Sorry we where not it, usually close up at 3.30 and been away for a few weekends, when its a nice day give me a shout and we will make sure we are in. Not long until we can get a picture of then side by side!

Wgroove

1st February 2011 05:27 PM

Quote:

Originally Posted by Spikehaus (Post 52462)

:)

Looks like that one has been answered, my prop was a heavy duty version so it cost a bit more, about £120 delivered, it was sent overnight courier!

For info it was:

700 mm L x 50.8 mm Dia Propshaft, 35 mm dia x 25 Teeth Sleeve, 4 Bolt flange

I am sure they will help you out,

Daz,

Sorry we where not it, usually close up at 3.30 and been away for a few weekends, when its a nice day give me a shout and we will make sure we are in. Not long until we can get a picture of then side by side!

Thanks for the detailed info !
I believe that you using a T9 gearbox. Mine is a MT75, will that make any difference ? The original prop i got was a two piece shaft. Do i have to use a piece from the old one ? Does the new one comes also in two pieces ?

Regards,

Wim

davedew

1st February 2011 05:41 PM

Wim,

Below is a picture of the prop I got from NWP. If you tell them what gearbox & diff you are using, and the distance from the diff flange face to gearbox oil seal and they do the rest.

As said before made and delivered within 24 hrs. Quality product & price.
Prop is one piece with two UJ's.

Spikehaus

1st February 2011 06:26 PM

Bailey Morris Ltd have a few great PDF;s to capture the information you will require:

http://www.baileymorris.co.uk/kitcar.asp

Wgroove

2nd February 2011 11:35 AM

Thanks for the info and pictures !
Does anyone have a picture of the propshaft and adaptor plate for use on a MT75 ?

Thanx,

Wim

All times are GMT +1. The time now is 03:14 AM.

Page 2 of 3

Show 40 post(s) from this thread on one page