http://www.porsche924-944.nl/manual/.../image002e.gif

TT

Where there is a will!!. This guy has taken an sfi steel bellhousing and is having it made as a multifit for vw ect to the T5 borg warner.:cool:

http://www.motorgeek.com/viewtopic.php?f=15&t=38205

Bob

thanks for all the ideas and help :D

I do wonder if that porch torque tube and transaxle could prove to be a winning idea.....

924's are cheaper than chips if out of MOT..

TT

Its great but its basically an audi transaxle with a tube bolted to the front, there would be no where between the seats to get the bell housing in if you try and keep driveshaft centerline right. I suppose you could trim all the bellhousing off and just run a prop to the input shaft.

http://t1.gstatic.com/images?q=tbn:A..._44-_XUQ8sLg1A

bob

Alpha x, Geert in holland had an adapter plate for the type 9 and there is a pic on the forum somewhere.

He is no longer on the forum and has not been for a while.