![]() |
I've been scrounging to get good copies of the Mazda diagrams, but I think I'm going to spend the time color coding them (the ones I have are all black and white). I also labelled everything as I took it out of the car, so hopefully that will help the process. I am intimidated though!
|
the wiring diagrams are black and white or the loom is all black and white
|
![]() Finished the fabricating on the expansion tank bracket ![]() ![]() ![]() Bracket for top hose Cooling system nearly finished i just need a new thermostat and a few jubilee clips |
![]() I had to move the steering wheel a bit closer to the seat ![]() And i made a supporting bracket for the steering shaft ![]() And i tacked the steering shaft extension in place |
![]() More wiring ![]() I got my rear lights they are for a defender I got all clear ones ![]() Mounted my maf using some turbo intercooler piping ![]() Mounted my fan aswell |
Chipping away at it ;)
Are the lights 'E' marked? TT |
As well as E marked ensure that the fog light has an f or a b mark as well as mine failed the test on the first visit
Arfon |
The wiring loom is color of course, but the diagrams I have are black and white print. They have codes, but not easy to work with...
|
Been away from the build for a while
Next on the list was too hinge the bonnet at the front So i made a steel frame for the front of the nose cone which i riveted in place the fibreglassed over to give strength ![]() ![]() ![]() ![]() |
Bonnet now in place
![]() ![]() Bonnet in place passenger side gap to scuttle panel ![]() Drivers side gap This will not do ![]() |
All times are GMT +1. The time now is 07:02 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.