Thank you, though 'twas merely an edumocated guess.:cool:

Yes throw us another.;) I don't wanna go outside n fix my mates car.(hate rattles in suspension):rolleyes:

next question.......

how many actual cuts are needed to make the main frame of the chassis as per the parts in question 1 ?

now i,m getting really sad :o :D

andy

You really need to get out more Andy :D :p

Will the total include cock-ups :o :o

Beyond sad.:p

107 ? uhm no notches add a few, 111?

i,m thinking each tube has 2 ends so that gives 2 cuts but then also all the other cuts such as the compound angles etc, so if it helps its over 200 cuts :D

the 3rd question is even more sad :o


andy

400 + cuts in my case :eek:

I square cut all of my tubes first ( To get the steel out from under my feet )

The angles were cut as & when I needed them ;)

Yep, there's a right way a wrong way & Ronnies way !!?? :confused: :confused:

Bonzo i cut all of my rails like that as it meant i had a flat edge to then mark the next piece up from. Im guessing 243 for the amount of cuts...Now what really would be sad Andy, is asking us how many mm of steel we had to cut through and the amout of steel removed by making them cuts...:p :D

doh went out to lunch and missed it all. andy i thought you was busy :D

sorry guys, i was busy but was posting when had chance of a cuppa ;)

the answer is between 202 to 250, maybe that narrows it down a bit for you :D

cheers
andy

Is that on a hot or a cold day Ronnie? :D

I knew the answer too, but then i should. If your talking chassis plates though Keith's your man, he knows them all off by heart.

Kind regards

John