Feelin like a teat tho over the driveshafts

That'll be because they are the plain nuts I am using prior to final assembly !! ;)

Sorry my efforts have not been of any use to you .... Hope you manage to get it sorted.

Know that feeling thanks for your efforts dude

Sorted now?:)

i'll let you know :) still if you fancy a day of coffee and biscuits mark your walcome to come help with the rest of the rear brake lines ;~)

Abs ring doesn't seem to be removable

Hi, mine all went together fine without removing abs rings or anything else.
makesure the hub is pulled all the way through the bearings you should see a couple of threads sticking through the nut. also make sure the shafts havent popped out of the joints and check the prop flange on the diff is central in the tunnel.
finally when its all together you should be able to move the shafts a little sideways this will show nothings binding
hope this helps
Ray:)

No need to take that off if it's possible to anyway.