![]() |
Small update its been a while since I've posted anything.
![]() ![]() I did a bit of a re jig on my roll cage replaced the front hoop and added some side bars. ![]() I made a couple of seats just need to learn upholstery now. ![]() And managed to get the diff and wishbones fitted. |
![]() ![]() I also made a new gear stick lever and knob. |
Oh noooo, I've been daydreaming about making my ally scuttle and bonnet for ages and the last thing I needed was more inspiration!
|
bit more progress tonight got the rear shoes fitted.
![]() also had a go at making an english wheel with left over steel at work. I've had a bit of a go with it but I'm going to need a fair bit of practice before trying some body work. ![]() ![]() |
It's been a while since I've been on the forum but I've still been tinkering away, it must be the slowest build in history but anyway I thought I'd show you lot some of the work I've been doing on the roadster.
![]() ![]() ![]() ![]() a few of the nose cone I've been working on. more to follow |
started to weld it together lot more work to do yet.
![]() ![]() Also started an aero screen. ![]() ![]() |
Started some arches as well.
![]() ![]() the rears under way. ![]() ![]() |
![]() ![]() ![]() Started the fronts to. |
And as she stands at the moment the body work still needs some refining but it's getting there.
![]() ![]() I'm very quickly running out of room in the garage. |
Wow, Not many people roll their own body! Hats off to you!
As for the longest build, doubt it. I have been going for 9 years and not touched it in 4! |
Yes, your work is very impressive. The shop in the background of these latest photos hints at some involvement with sculpture, which would be a confidence builder. Even so, those clamshell shapes are a complex and sophisticated 3D shape, and your work looks excellent. They are quite an accomplishment.
|
Evening everybody, it's been a while since my last post so I thought I'd give you all an update.
![]() managed to get the rear arch metal work finished. ![]() ![]() Built a new exhaust ![]() put a bracket for the headlight front indicators together just need to make the bracket that attaches to the clamshell wings. |
Thought I'd start on the trans tunnel cover.
![]() ![]() ![]() ![]() |
![]() ![]() Start off by making a foam pattern then moulding it.I then produced a wax from the mould and got it cast at work, then a lot of sanding later got the metalwork finished just need to make some gaiters the handbrake and gear lever. |
![]() ![]() ![]() started to rough out the dash but still need to do some more work on that so will need to do another update when it's finished |
![]() ![]() ![]() ![]() Started work on the inlet manifold as well, using a set of triumph speed four throttle bodies hope they work out ok I've spent a while putting these together. |
Some amazing work there, really true craftmanship.
TT |
Thanks twin turbo. Trying to make the most of the lock down and get a good bit done.
|
Amazing work. I would say it's inspiring, but i'm just off to the garage to start chopping my car up with the hacksaw....
|
evening all bit more of an update managed to get chance to start work on a rear diffuser still got to work out the fixing points but it's a start.
![]() ![]() Also managed to get some brackets made for the seats. They're 3rd row seats out of a volvo XC90 not a bad fit. ![]() ![]() |
![]() ![]() |
All times are GMT +1. The time now is 07:12 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.