Quote:
|
Quote:
Cheers Stot |
Uprights are ready to just bolt on now with all new brake seals, new rear bearings and new bushes. :cool:
Next I need to finish welding up the chassis and get the wishbone brackets tacked up. Cheers Stot |
Very nice indeed;)
|
Look what just turned up from Phil @ Talon. :D
He even painted them for me. :cool: Cheers Stot |
Made some more progress with the chassis. Trans tunnel is in and suspension brackets are on.
One of my D12s has gone missing. :mad: most everything else is fully welded. I trial fitted one of the front suspension and uprights to see how it would fit too. Look a bit weird from that angle but it will probably make sense once I do them flat. Cheers Stot |
Some cracking progress there :)
Are the wishbones roughly based on the Saturn design? If so you may have a problem with the steering arm extension hitting the lower wishbone. You can get round it by limiting the amount of steering lock as it only just hits on full lock. I know Phil made some lower wishbones with a slight bend in them to get over this as well I believe for the Voodou design I think. Any thoughts on how you are going to mount your diff yet? It's been a topic of much debate in the past on which way to mount it. Looking forward to more photos...:cool: :cool: |
Quote:
Quote:
The next goal is to get it rolling so that I can wheel it to and from my detached garage so steering uprights and maybe handbrake next. Cheers Stot |
Made a start on my pedal box tonight.
I note on the MX5 setup the furthest left lower bolt hole is covered by the pedal so needs to be repositioned. Cheers Stot |
Both skov and myself noticed on he mx5 the accelerator pedal moves a long way. It might be an idea before its installed to see if it can be modified in some way.
|
All times are GMT +1. The time now is 05:02 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.