Haynes Forums
Page 4 of 5 « First < 23 4 5 >
Show 40 post(s) from this thread on one page

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   What's everyones current build status!! UPBEAT THREAD! (http://www.haynes.co.uk/forums/showthread.php?t=7287)

Deanno 18th October 2011 05:17 PM
chassis nearly finished,wishbones done, bodywork getting there ,the new arrival putting a hold on things? YES

really enjoyed designing my "one-off" grill just waiting for it to be authorised to avoid copyrights then get it made.

Deanno 18th October 2011 05:20 PM
Quote:
Originally Posted by davidimurray (Post 66738)
Rolling chassis, engine running but needs some tuning. Most bodywork fitted. Really just need to fit front wings, get a propshaft and sort out all the IVA items and she will be ready.

Progress slightly delayed at the moment as I got married on saturday :D :D :D and fly to Florida tomorrow :)
congratulations to you both, did the weather hold off for you?

rpjg1975 18th October 2011 05:53 PM
Everything been on hold for many months now but been collecting bits and bobs from time to time. Been building the bargain garage I aquired which is almost done then I can get back on with things. I am at rolling chassis stage using dummy shocks. Engine fitted but may need adjusting due to clearance issues.... Need to consult my build guru... Fuel tank, roll bar kit, some body panels, headlights and brackets, wiring and radiator all ready to get fettled and fitted. Good luck to everyone else with their builds

Janne E 18th October 2011 06:27 PM
Driving:D :D

Driving:D :D

Janne

Wgroove 19th October 2011 09:53 AM
Chassis almost ready (98% finished). Front and rear wishbones, wheels, steering wheel, seats, rollbar are fitted to the chassis.
Nosecone, bonnet, rear wings and scuttle from SSC ready to fit !
Bought a raceline sump for my zetec for more ground clearance, and now i'm waiting for the engine mounts, cat and exhaust from Kitspares.
So probably next weekend i can fit the engine, and do the last welding thats needed and fit the drive shaft.
One week ago i bought on Ebay a K3 ECU from Emerald.
If everything fits, the chassis shall be powdercoated. After that...:) :) :)

So far the status of my build.

HandyAndy 19th October 2011 10:40 AM
Quote:
Originally Posted by Ashtonr (Post 66625)
Just booked my IVA
Best wishes for your IVA , you have built a stunning car :cool: & in such a short time :eek: :cool:

cheers
andy

HandyAndy 19th October 2011 01:13 PM
Quote:
Originally Posted by davidimurray (Post 66738)
I got married on saturday :D and fly to Florida tomorrow
Congratulations David :cool:

Have a great time on honeymoon :D ......Florida is good too :p

cheers
andy

alga 19th October 2011 10:22 PM
Attached ally side panels!

squbti 22nd October 2011 09:33 AM
2 Attachment(s)
After my fallout with SFRO in sweden I lost the will to continue with my build & felt like I had to take a break so I built this recumbent trike using my old mountainbike as a doner Attachment 1342Attachment 1343.
This gave me a good booster & i´m now back on track with my roadster build & will post som pics soon,if everything goes as planed i hope to be driving next summer:).
cheers
samy

ayjay 22nd October 2011 10:37 AM
Is there room for a cosworth engine:D


All times are GMT +1. The time now is 07:58 AM.
Page 4 of 5 « First < 23 4 5 >
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.