Why is Aluminium so expensive now I need some?!
Just been on Parker's website, and a sheet of 2mm 2.5 x 1.25m NS4 Ali to do the floor is £78 + VAT! Two 2.5m x 1.25m sheets of 1.2mm NS4 ali to do the rest of the panels is £95! That over £170 + vat just for the ali!
Anyone know somewhere cheaper in Kent / London? Cheers Adrian |
thats not bad really if you ship around you might only save a few squids i got quoted £130 for a sheet of 8x4 3mm 5025 semi hard and that was cost price.
thwang |
That price is about right for ally sheet. Unless you buy alot of it week in week out thats what you'll end up paying. I buy mild steel tube ERW and CDS at a reduced rate because I'm an account holder and the supplier gets a regular order from me. You need to find a friendly sheet shop that you can bung £20 to the 'buyer' to add your order to theirs ;) :D
|
|
Dave,
You are the man. This forum never ceases to amaze me:D |
|
Quote:
(£93 vs £51 both + VAT) And that size of 1.2mm 1050 is £53 vs £32. That's a mighty big difference. The prices from Aluminium warehouse are a lot more manageable. Near as damn it the same as what I paid Parkers in September |
to be honest youd be better off gettin to know the laggers on sites around the country, the stuff they use is not the best for flooring but it sure does the job when it comes to panneling the sides and the interior. nuclear sites, petrochem refineries, normal power stations, all these have laggers, theres sure to e some private firms too which, in the same way as steel suppliers have skip loads of offcuts, have skip loads of ally, i managed to get 4 strips of 1.2mm x 3m x 1m and a sheet of 1.2 3m x 1.2m for free by just askin about what they had for scrap, its a long shot, but may well be worth it :) :) :)
|
Aalco quoted £26.00 8x4 1.2 half hard sheet.Dont know if they are nationwide.
|
Update on the above they are nationwide with 17 depot's and do all alloy products.
|
Yep, checked them out earlier, and there's one 5 miles from me! Will give them a call on Monday.
Cheers for all the responses, if I find it cheap, I'll let you all know! Cheers Adrian |
I last bought some alloy sheet on 21/09/09 From my local steel stockists
1.2mm half hard was £31.50 +vat & 2mm was £49.50 +vat Full sheet size of 2500 X 1250 I thought it was quite expensive till I got some local quotes elsewhere, One quoted £96 + vat for the 2mm :eek: |
Ali trees are hard to find don't you know....;)
|
Update
Just thought I'd let you all know, if you want some Ali sheet at the moment, Industrial Metal Services (IMS) in Essex were the cheapest by far.
Comparison: For: 1 off 2mm 8 x 4 NS4 2 off 1.2mm 8 x 4 NS4 Parkers - £205 inc vat SPA - £147 inc vat Aalco - £151 inc vat IMS - £110 inc vat! These are all based on collection. Hope this helps someone, IMS are nice guys to deal with, and if you need delivery it's £25 + vat Cheers Adrian |
Alloy sales Ltd 01707 268222 ( Welham Green,Herts) quoted the following-
8' x 4' 2mm (5251 H22) - £54.00 + Vat 2m x 1m (" " ) - £41.80 + Vat 8' x 4' 2mm 5754 (5 bar)- £ 59.60 + Vat 2m x 1m " " ( " )- £ 48.00 + Vat Vince |
All times are GMT +1. The time now is 04:18 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.