![]() |
Picture of Sides-Nosecone anyone??
Anyone having a cloose picture of Saturns sides meet nosecone?
Janne |
I,ve got some pics of my car with sides & nose being fitted, tho the bodywork was made by Mark at Triton, but they are the same moulds we use at Saturn.
would you like a pic posted on here or sent via email to you? cheers andy |
Handy Andy you can post it here, for the moment I have my e-mail in another computer...
Thanks Janne |
ok, hang on a mo,
i,ll post a pic, let me know if its what you need. cheers andy |
does this help?
![]() |
or this...
![]() |
Thanks it helped:)
As allways great help from the Saturn boys:D Cheers Janne |
no problem :o glad to help. at least its not stopping me working on my car :D
i,ve found another pic from the rear looking towards the front from the side of the car if you need it? cheers andy |
Yes please:)
Janne |
its not really close up but might help, this was me trial fitting the bodywork, i cut the holes in the side panels for the wishbones & shock position etc, tho the rear lower wishbone cutout needs more cutting out than this pic shows.
![]() |
Quote:
working on my own car tho ;) :D cheers andy |
Quote:
|
Quote:
cheers andy |
Will be nice to see you both Graeme and Adrian, always nice to see builders faces and any excuse to get out in the car.............:D
|
If I get my sorry a**e out of bed at 4 in the morning I will see you there.
|
Quote:
|
Quote:
I'm sure it'll all be worth it |
Quote:
|
It will be a loooong hard day:D
Cheers Janne |
:) There all long days Janne but it's a nice day over in sunny Hartlepool and i've just been for a 20min blast,,,,,better than a handful of paracetamol anytime.
|
So on your side pannels Andy, Did you follow the line of the front frame down, marking it onto the side pannel? then cut down that line?
Cheers Jas |
Quote:
I did cut the area around the steering rack gaitor & felt it was easier on the eye if that area was cut to allow the rack gaitor & front lower wishbone enough "clearance" in the panel in one cut....if that makes sense :o If you look closely in the pics you can see some of the GRP that is part of the side panel that goes under the chassis & i think i might trim that down a bit too. cheers andy |
ok mate, thanks alot! will hopefully get a go at that this afternoon or next week
|
look forward to seeing some pics of your car Jas,
nice one mate.:cool: cheers andy |
Quote:
Thanks so much for your hospitality yesterday. I thought I was pretty motivated in getting my car finished but after you taking me for a ride in your fabulous car my motivation is through the roof. It felt so smooth and planted. Hope mine comes out nearly as good. I know what shock/spring combination to go for now. Would love to have the same engine setup as you but for the moment will have to stick with the Beemer 318. I will probably go for the bike carbs/megajolt like yours though. Thanks again. :D |
Thanks Graeme,
I am pleased you enjoyed it and it was worth the trip over. The time to take people out is on the track on a dry day, the haynes comes into a class of its own then. Tested it against an MK on last track day and even though my engine was mis-behaving the MK couldn't touch it on the corners. Again anybody is welcome to have a go on 9th April at teesside Autodrome. Cheers....AndyH |
All times are GMT +1. The time now is 12:14 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.