Dave's Build Thread Pics added pg2 :D
 

Well guys, my brand spanking welder arrived today, along with an auto darkening mask and pair of gauntlets.

I'm hiring my lockup friday morning and i've got a generator arriving friday afternoon.

I'm half way through sorting the gear for my chassis to get going.

And finally to get me started, i've got all my donor parts getting delivered on friday for £265 which doesn't seem like a bad price.

Anyway, I'll keep this thread updated with my progress and any questions i come accross along the way.

Wish me luck with my build :D Just need to let my bank balance recover from the blast now :eek: haha

Dave.

Dave,

Great to hear your build is making some good headway.:D

I will pop back with anticipation and have a read soon.

Good luck.

Cheers Ginge

Hi dave, well done hope it goes ok, Just a thought is the generator for use with the welder, if so you will probably need quite a powerful one as welders takes some juice. I only had a 2.5kv (2500watts) and I couldn't get anything to work on it. You may need something like 5.5 to 7.5kv, there is a way to work it out by checking the welder power usage but not sure what formulea to use. Maybe someone here on forum may know.
tony

Bought a 6.5kva one, so should work with the welder ;) Thanks for the advice. :)

Hope it's super silenced..

Good luck on the build, we are here to help :)

TT

Go for it buddy, it'll be good and sod the neighbours, unless you live near me of course:D . Looking forward to regular updates on your build.

D.

Good to see you getting on David and put some pics up as you progress.

When this crappy weather clears up will probably have a blast out and come and visit.

All the Brest...AndyH

Feel free. I'm sure i'll be working on it most weekends :P


Anyone heard from HandyAndy recently?? :confused: I've sent him a few PMs about steel, but he doesn't seem to be around. Hope he's ok and just busy. :)

I believe your best contacting him direct at Saturn if you'd like to discuss business with him

http://www.saturnsportscars.co.uk/

HandyAndy advertises his email address in his sig: andyroadster@yahoo.co.uk
Better than PM as it does not overfill.

Already sent him one :cool:

For those of you who like pics, look what arrived today :D

It's nice when stuff starts turning up, it's like christmas :D

Terry

You might want to get your self a fan to blow the smoke out of the container when you start welding and grinding. :rolleyes:

Terry

Well done David,

just think there's going to be a car growing in that container soon......;)

Also had to reply since i was on 666 posts and can't be having that.

AndyH

**Update Time**
 

Just a small update from the last few days.

Got some wood, built the table, got the chasis kit. All so far so good...

Got some scrap 2mm plate to practice my welding, after 2 days of trying, the welder won't penetrate.. I assumed it was because i was running it off a generator, so took it home to have a try on the mains - still the same. So just to double check, tried my Dad's gassless 100A cheapo mig, and it worked straight away.

Turns out with a bit of help from the mig welding forum, my new welder's got a blown diode, so it's only running half power :(

So my build is now at a stand still until i can get the front frame welded.





As it stands...



Dave

Just a little update
 

Still waiting to get the welder back from being repaired, so i've started cutting the wishbones and making jigs.



Also, my 2.0 zetec arrived yesterday :D Do most people fit an escort sump?? (as the mondeo one doesn't line up with gearbox bolt holes, also is too big for the starter motor)

I've made a build blog that will be updated regularly.

It's located here... http://davesroadster.blogspot.com/