2.0 Twin Cam Sierra breaking or whole car
 

Hi,

I've got a twin cam Sierra that I was going to use as a kit car donor but due to many other commitments and projects i'm now unable to find the time.

2.0 Twin cam engine.
Auto box although I have several 2wd MT75 gearbox's and associated parts eg props / pedals etc available
Other than that car is complete. Just out of MOT and Tax but was used daily as a run about and everythings ok. May want the odd bush renewing and the rear shocks are knackered.

I also have a massive supply of Sierra spares available so if theres anything that you want just let me know. Pinto bike carb conversions, MT75 / T9 propshafts / diffs etc etc

I'm happy to sell the car complete for £300 as it is or break it up for parts if people need the front assemblys / rears / hubs / rack / diff etc.

I can deliver parts if required, I am up and down the M1 corridor regually and I also have a flat bed to deliver the car if required at a cost of £1.50 per mile (only charge the outgoing journey, not the return milage).

Either reply on here or email me at doughnutters@hotmail.com

Cheers :D

I am after an MT75 box, how much?
Cheers.

Don't suppose you have the rubber inner gear lever gaitor do you?
Enoch

Assuming its just a 2wd twin cam MT75 box then its £60 :D

2wd MT75 hybrids for the 24v Cosworth engine are a fair bit more. I have all the bits to build 2 of these but none ready to go at the moment.

I'll have a look and take some pictures later for you if I have :D

Im after some steering column shroud? Do you have a picture, as I have 2 of the wrong kind already:(

There are several different types of surround for the steering coloumn dependant on yera. Mk1, Mk2 and facelift Mk2 ones.
I think I have at least one of each in the loft / shed or garage, which type is it your after?

The one im looking for, came from a G reg, 2.0DOHC Giha, I have the bottom half, just need the top half and hazzard switch. I can take a picture if it is still needs explaining:)
Cheers, Jas

I am after rear assembly too, diff/shafts/hubs how much for this including box (2wd) cheers (where are you based?)

Cheers

I'm happy to sell the rear beam, diff, both drive shafts, hubs, calipers and a 2wd box for £150

I'm based in Derby but can get goods to Northampton and Watford areas on a regular basis :D

I need a good type 9 gearbox mount. Cheap;)

J

Cheers for reply, too steep for me thanks.

Doughnutter you have a PM

Doughnutter you have another PM

and another pm :cool:

All PMS replied to.

Cheers :D

Any other parts
 

Hi Guys
I hope you all got what you needed, but for anything else try www.fordpartsuk.com this is where I got all my stuff particulary DOHC.

Well provisionally the rear assemblys sold, complete with front hubs and calipers.

Leaves...

Steering rack, steering column, front crossmember, ARB, various engine parts, header tank, etc


Checked my pile of parts and unfortunately I don't have one, sorry!

Hi do you have the propshaft?

quite happy for you to cut it down to about 18" long if that helps with postage LOL

only need the rear UJ and about 18" of tube?

price posted in UK please if you can help

Tony