![]() |
Radiator hoses
Having trouble with finding a suitable route for the lower radiator-engine hose on my 1.8 CVH engine. Does anyone have any pics??
|
I haven,t got any photos of the lower hose route but I can take some tomorrow morning if that helps ?
I forgot to ask....which Rad are you using? cheers andy |
Hi, I'm using a Clio rad, and already routed the hose up over the chassis rails but I think it's too high as water doesn't circulate.
If you could take a pic that would be great :) |
I,m using a Polo rad, so not sure what the inlet/outlet positions are on a clio rad, but I,ll take some pics in the morning & post up on here.
May i ask, what have you done with the heater hose connections? have you looped them in the return flow direction? just trying to work out why yours isn,t circulating etc. cheers andy |
Hi Andy, Ive looped the heater hose from the auto choke to the tee with the bottom hose connection on the L/H side of the engine, if that makes sense. The water flows through this pipe fine, but not through the rad :confused:
|
Quote:
hmmm , no idea why its not flowing thru the rad either :confused: I,ll post the pics tomorrow, see if that helps in some little way. cheers andy |
Andy, I've got a polo rad, but it's totally bare, any chance you could get a few pics of yours, uncluding the thermostat housing
|
Quote:
ps... what do you mean "its totally bare" ? cheers andy |
Quote:
|
Quote:
|
Quote:
Have you checked for airlocks? |
Hi Mark, I have considered the Thermostat, and plan to check it out this week. Cheers :)
|
oops :o
I,ve taken some photos but forgot to post them on here :o I,ve just got home & about to have dinner, I,ll post the pics up this evening. cheers andy |
sorry for the delay in posting these pics, had a prob with my camera
first pic shows the expansion bottle location & the hoses from the water pump exit ![]() 2nd pic shows the bottom hose route ![]() 3rd pic shows the top hose from the thermostat housing ![]() I hope the pics help, this I,m sure isn,t the only way to route the hoses , but how I did mine :) Please excuse the various wires in the photos, I was doing some wiring when I took the pics. cheers andy |
Ah, what I thought was where the thermostat would go on my Polo Rad, is actually where the fan temperature switch goes:) Got to love the internet.
|
Quote:
Glad you got it sorted ;) cheers andy |
Hi Andy, Thanks for the pics. I have done my top hose pretty much the same, but have tee'd in the pipe that should go to the expansion tank. Where you have placed the tank looks much better. Am I correct in thinking the outlet from the expansion tank joins the Tee that connects to the engine block and auto choke? Your bottom hose route appears similar to mine, but where does the other end of the pipework go, I cant see in the pics. Does it connect to the steel pipe leading into the engine block?
Thanks again for this, off out now to re mount my expansion tank:) |
no prob, glad the pics help.
The bottom outlet of the expansion tank is connected to the "T" piece that is then connected to the water pump elbow on the passenger side of engine, the top "overflow" point at the expansion tank is connected to the auto choke/thermostat housing. I,ll get some more clearer pics today & post them up. cheers andy |
Hi, cheers Andy. Ive got the expansion tank thing clear now, just curious the path the lower radiator hose takes. Im thinking it connects to the water pump pipe?
I'll post a couple of pics later of my current set up that doesnt work! |
Pics of hose route to bottom of radiator. Water won't pass through the long horizontal pipe..could it be an air lock causing this?
http://www.flickr.com/photos/jeze1967/4894329977/ http://www.flickr.com/photos/jeze1967/4894329257/ http://www.flickr.com/photos/jeze1967/4894924038/ |
Jeze2903...you have a PM .
cheers andy |
All times are GMT +1. The time now is 11:45 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.