Sad Day: My stuff has to go :(
 

Its a sad day, but I have come to the conclusion that my parts I have been collecting have to go.

GUTTED :(


8v DOHC engine,
DOHC ECU
1.8 Pinto engine
pinto manifold and carb (solex?)
MT75 box
Rear axle (diff shafts hubs etc, still mounted on subframe)
1.8cvh loom (boxed/bagged)
suspension bolt set
steering column (with keys, stalks)
Build table (just the top board 18mm ply and cls frame)
Will throw in the book and my old locost book, just so i don't cry every time I see them!

will add to the list as I find bits.

Have had to put money into my business, so got to clear the decks.

Will hopefully be back once on an even keel again.


Open to offers.

Sorry to hear that and good luck with your buisness interested in rear hubs ...what price you after Pm me if you want to keep it out of thread

Sorry to here the news bud :(

How much do you want for the column and the rear end?


I know you said offers but it will save time for all of us if you just set prices.

bolt set.
 

shame you have had to do it, but I will take the suspension bolt kit from you.

Thats a big shame Headshot, let's hope that somebody else can put them all to good use and all the best with whatever you choose to do next.

Regards...AndyH

Sad news bud :-(

sad to see you go but good luck & hope everything works out with your buisness.
samy

Bad news mate but better luck in the future and dont be a stranger to the forum,good luck.

Hi guys, sorry I haven't replied to PM's and stuff, have been busy sorting other stuff (I think its called life! )

I have decided I dont have the time to split it all and sell individually, so will take offers on the lot, or chuck it all on ebay.

:(

p.s. spending more time with me head in the business should mean I can retire early and then build one quickly :)

You might do better if you just say how much you want.

deleted.....

OK Guys, seems like some good progress has been made by some people since I last looked in :)

I have decided I am going to split my little pile of bits.


DOHC engine complete with manifolds. £30

DOHC ECU: £10 or FOC with the engine

1.8 Pinto engine SOLD Georgenewman1

pinto manifold and carb (solex?) £10

MT75 box SOLD Georgenewman1

Rear axle (diff shafts hubs etc, still mounted on subframe) £60

1.8cvh loom (boxed/bagged) SOLD TALON

suspension bolt set SOLD

steering column (with keys, stalks) SOLD

Build table (just the top board 18mm ply and cls frame) SOLD (to a warhammer gamer!!!!! )

3 small spools 8mm mig wire £5

Can arrange postage on smaller items, but most bits are heavy! Or can deliver all except engines/axle within 50 mile radius of CB23 at 50p per mile.


All are for collection from Cambridge area (CB23) quickest way to contact me is via email on ddplumbing@gmx.co.uk or via text on zero7967335584.

I have given back my engine crane so bare that in mind when arranging collection.

Need to sell to buy new power flushing gear for the business :(

Or make an offer for the lot, text or email as I am not getting back on here as often as I would like :(

Laters
Chris

I'll take the 1.8 cvh wiring loom please. Email sent.

Have replied to all.

does the 1.8 pinto have anything on it ( ancilliaries, carb ?)

TT

may be interested in that and the dohc.. possibly.

Pinto is bare, and some one has dibs, just waiting on reply to email.

DOHC is complete minus alternator brackets, I have the alternator for it.

Have a fuel tank (no swirl pot, so carb only): £20 +p&p (will get pictures today)

If you can't shift the DOHC, I'd be interested in the sump, dip stick (and tube), oil pick up and baffle / windage tray.

I'd be very interested in the fuel tank. Is it a book spec fuel tank?

I may be interested in this if still available

Russ

will post pic in min or 10.....

Also have this kit. Self tinting adjustable darkness. £50 +p&p

Headshot, I think I will give the fuel tank a miss. I'm looking to get a book spec tank.

that was one of thoes ebay tanks
army surplus or somthing

whats the update what do you have left :)

Price reductions on some bits:


DOHC engine complete with manifolds. £20

DOHC ECU: £10 or FOC with the engine

1.8 Pinto engine SOLD Georgenewman1 (provisional)

pinto manifold and carb (solex?) £10

MT75 box SOLD Georgenewman1 (provisional)

Rear axle (diff shafts hubs etc, still mounted on subframe) £50

3 small spools 8mm mig wire £5

Fuel tank £20

Welding mask and gloves £45

Oil Catch Tank £20 (Genuine TWR built, have a mate who used to work with them in their Jag group C days)

Not sure, I bought it from a builder on here.

Headshot,

Any idea the capacity if the tank or can u give me some dimensions so i can work it out?

Cheers
Russ

Thats the same fuel tank I have in my Roadster,
when I bought mine I was told it holds 24 ltrs, tho I think it can hold a little more, I haven,t filled mine up fully yet,

Cheers
andy

Andy,

That's brilliant, cheers for that.

Headshot, can you give me a price including postage to dl10 5lw and i can send you a payment through paypal.

Cheers
Russ

sorry guys, been away, son got rushed into hospital, will get on this, this week.

Sorry to hear that, hope all is well now?

Thought you had gone awol :)

Cheers
Russ

I will have the back axle if it is still available

ok, it is.

email on ddplumbing@gmx.co.uk or text on 07967335584 to sort pick up etc.

fuel tank postage
 

Hi headshot,

Just wondered if you have had chance to look at the postage for this for me yet?

Cheers
Russ

Hi,

sorry guys. Been busy.

Postage on tank is £15 :eek:

No worries. If you send me a pm with your paypal address i'll send you the cash over.

Cheers
Russ

Sent you a pm :)