Progress pics
 

Here are some pics of my progress so far...spot the deliberate mistake ..penny caramel for first to see it !! my bets handyandy !!

[IMG]http://i1229.photobucket.com/albums/ee466/Andy_Locost/P3060112.jpg
http://i1229.photobucket.com/albums/ee466/Andy_Locost/P3060110.jpg
http://i1229.photobucket.com/albums/...t/P3060109.jpg

I hope i have eventually sussed out how to get pictures on the post instead of bloody links !!

Top bone the wrong way up.

TT

Oooohhh I like caramel :D

Just put kids to bed then have a looksy :)

cheers
andy

Need to sort yout img tags..

Looks good though, I am going to take my engine out and forget about that and crack on with other things...

TT

That wooden shock, wooden work :D :D :o

Besides your minor error, you look as if you have made some good progress :cool:

Have you done plumbing for petrol and brakes..have some 8mm microbore "aquired" need some ideas

I win I win I win :D

There,s no CP24 plates installed ??????????? :D

Also, you need a locknut on the Transit drag link,
& also it looks like you have the bolt going thru the upright ( where it clamps the mushroom ) the wrong way, its threaded at one end :)


Do I win the penny caramel? pleeeeeeeease :D

cheers
andy

haha andy i new you would have some more ...the reason the transit lock nut is not fitted is it felt bloody tight ..but i saw wee dents in the outer edge so was going to ask around and see if this is the norm ? CP24 plates refresh my memory...brake pipe plates ? cant remember and book is outside in the garage

oh aye and my hubs were not threaded...granada hubs....and even after accidently buying 2 tapered reamers the bloody things didnt need done !!! for sale 2 tapered reamers !!!

You sharp eyed devil Andy, looked at for ages & missed that !!?? :o

:D

The only other thing that I,ve noticed is the steering extensions are set at different lengths & the steering rack appears set too high in the cut out slots.

Andy B............. CP 24,s go underneath the front lower rear wishbone brackets, its where BR8 & BR9 meet BR1 & BR2, a small triangle plate.

A little tip ......... it may help you later on in your build.......the holes where the handbrake cable goes thru......cut a 2mm slot from the bottom edge upto the hole ;) ...it saves needing to cut the handbrake cable in the middle of the cable, just then need to shorten it at one end when fitting it to the drums......thats if you are using drum brakes of course

Have I spotted the "deliberate" error? .

Your really cracking on with your build, its looking great, well done mate :cool:

cheers
andy

Thanks Andy...will do the mod on the handbrake plates..will sort out the mushrooms and top bone ...thats why i had screwed my extension out so much ...the camber angle and general direction was obscene looking....as for that cp24 barsteward....i will need to look in my box of bits ...thats why i goaded you with a penny caramel...think twin was first....but i will send you guys some with my next order for back end stuff !!!