Rolling Rolling Rolling!
 

Rolling at last! Cant tell you all how happy i am. Only problem i have seen is the rear drivers side wheel is slightly toe in.... will have to investigate a bit more. Also note the front discs will be swapped for 330mm discs with brembo's
Also polo pic is to show the 13's compared to the 18's heh

http://www.youtube.com/watch?v=Ta-Zeleug1A

Looking great :cool:

The sun is shining, the chassis is rolling...what a great day you,ve had:cool:

Well done for reaching this major milestone of your build, its a great feeling, I imagine you are grinning from ear to ear eh?:D

cheers
andy

yeah am very very happy only thing thats a bit of a let down is the Toe in on the rear drivers wheel.

Gorgeous wheels!

I can,t quite see in the photos ( angle of photo), but is your "dummy shock" causing that? thats what it looks like to me ;)

cheers
andy

Thats gonna be one evil soab:eek: me thinks your'e gonna need a launch control:D :D

Yeah lol. Its going to be a bit nuts. Have to admit the ride height is not too bad. comes out at 16cm (6.3inches) using dummy shocks 330mm all around. Have to thank Saturn for the bits that arived today as without them all the bits would still be in box's lol
Ohh good thinking andy i will take a look tomorrow and see if thats the issue.

Does look good,Nice one :cool:

I shortened the dummy shocks I had on my chassis this afternoon,the change in camber was fairly large,may be better sorting the toe in problem when the suspension is set up with proper shocks.

yeah alot of setting up to do but really there should be no toe in on the back end lol

Agreed,one mil here and there will give problems,file, washer, weld,fixed.;)

Indeed because the hubs are at an angle can just stagger slim washers to get it back to normal. But anyhow! Still fantastic to get the thing rolling. Found a new 2.4 quick rack on locostbuilders along with clamps for £100 so getting them, just need extention and the tie rod ends and will have the wheels locked together. Then will be the large amount of fun getting the steering past the engine and getting seats in to get the steering wheel in the right place.... humm should do wheel first i guess then work back to the rack.

Its a good feeling getting to the stage you have,mine has done about 2 miles getting pushed in and out of the garage where I work everyday :rolleyes: