Haynes Forums - Escort steering rack drawings?

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Announcements (http://www.haynes.co.uk/forums/forumdisplay.php?f=2)

- - Escort steering rack drawings? (http://www.haynes.co.uk/forums/showthread.php?t=6158)

Airhead

25th March 2011 10:49 AM

Escort steering rack drawings?

Would any of you fine fellows have a drawing of the clamps for the MK2 Escort steering rack? I have to get a pair as soon as possible and a local place will cut me a set if I can get a drawing to them PDQ.

Thanks in advance

Matt

ozzy1

25th March 2011 12:50 PM

pm sent ..

Airhead

25th March 2011 01:22 PM

Replied, ta :)

Airhead

26th March 2011 09:11 AM

Thanks Ozzy they are perfect!

M

Ricky

4th April 2011 09:17 PM

escort steering rack

Hi everyone just wanted to know if I could get those drawings of those steering rack claps to if no one minds please!!! If possible could they be emailed to me please! rjt.correia@gmail.com thanks

Airhead

4th April 2011 10:38 PM

I sent you a set mate, hope PDF is OK.

M

Ricky

5th April 2011 12:12 AM

escort steering rack

Thanks a lot man pdf is perfect but I have a question what is those two small pieces for and where do they go and is that also steel.

Ricky

5th April 2011 12:38 AM

escort steering rack

Another question I have is in the inside of the clamps it has a radius do you know what that is and the holes for the bolts it says R4.00 what size drill will that be . Please

maxubar

5th April 2011 03:03 AM

Quote:

Originally Posted by Airhead (Post 56607)

I sent you a set mate, hope PDF is OK.

M

Can i have it too? i'm getting the steering rack this week and i need them.
Thanks

minicountryman1961

5th April 2011 03:09 AM

Quote:

Originally Posted by Ricky (Post 56613)

Another question I have is in the inside of the clamps it has a radius do you know what that is and the holes for the bolts it says R4.00 what size drill will that be . Please

D 8.00 = 5/16"

Airhead

5th April 2011 09:40 AM

Quote:

Originally Posted by maxubar (Post 56615)

Can i have it too? i'm getting the steering rack this week and i need them.
Thanks

PM me an email address and I'll send them across.

Matt

ozzy1

5th April 2011 02:22 PM

Quote:

Thanks a lot man pdf is perfect but I have a question what is those two small pieces for and where do they go and is that also steel.

They are the packing pieces that go under the steering rack to pack it up.Steel or Ally be ok although the original is a sort of plastic.

Ricky

5th April 2011 02:30 PM

escort steering rack

Thanks a lot for that info .just another question do you know the size of the bolt holes and the radius of the clamps on the inside

Airhead

5th April 2011 03:14 PM

That should be on the drawings; the bolt holes are 4mm radius and the brackets 14.45 and 20.3 radius.

Matt

minicountryman1961

5th April 2011 03:40 PM

Quote:

Originally Posted by Ricky (Post 56632)

Thanks a lot for that info .just another question do you know the size of the bolt holes and the radius of the clamps on the inside

The diameter = radius x 2

Ricky

5th April 2011 03:44 PM

escort steering rack

Thanks everyone for the info

Darryl

5th July 2011 07:33 PM

Hi there,
Could somebody please send me on the plans for the mounts?
Thanks very much,
Darryl

Twin	7th July 2011 10:22 AM

Could someone please email me a set of the plans please? pretty please :)

sultan-e3ma16@nrta.mod.uk

Twin	12th July 2011 11:25 AM

Thanx ozzy1 :)

maxubar

12th July 2011 10:03 PM

Hi all. i would like to have them too if possible. that's my next job. ;)
Thanks in advance.

Tiagomafly@hotmail.com

Twin	13th July 2011 09:54 AM

Quote:

Originally Posted by maxubar (Post 61108)

Hi all. i would like to have them too if possible. that's my next job. ;)
Thanks in advance.

Tiagomafly@hotmail.com

Done! ;)

good luck

Darryl

13th July 2011 10:25 AM

Could i have them too?
Thanks,
Darryl.

connelldarryl@gmail.com

Airhead

13th July 2011 10:41 AM

I have posted them up on my website for download:

http://www.vodouautokits.co.uk

On 'Public Files'

Thanks

Matt

All times are GMT +1. The time now is 08:17 PM.