water pipes
 

Does anyone know what types of metal pipes can be used to join hoses together. I have plenty of galvanised pipe of the correct size. Is it any good ?

Cheers


Peter

Hi Peter,

Not sure if you mean short connections or long tubes to join the rubber hoses.

For the long extensions I,ve used "Henry Hoover " tubes, perfect fit, stainless & best of all Cheap :o ( approx £2.50 per 1mtr tube ), plus they look nice too :cool:


Got mine off ebay ;)

cheers
andy

make sure you beed the ends i didnt and ginge and i got some pretty nasty burns when the pipe blew off.

I wondered what those pictures of burns were about...bet you jumped around a bit....correction a LOT

Cheers lads,

I've got some Hoover tubing somewhere. I remember the burns Ash - I'll get a flaring.

Peter

I've found my pipes and plumbed it all in, using the original hoses. But after proudly showing the wife my handiwork I noticed that I haven't got a connection to the bottom of the expansion tank. On the Sierra it goes to the radiator but my clio rad has only 2 connections not three.

Any ideas ?

Cheers


Peter

Does anyone know where to buy the Henry Hoover tubing to make the coolant pipes?

David

Numatic?

TT

ebay ...take your pick

http://www.ebay.co.uk/sch/i.html?_tr...at=0&_from=R40

Thanks Kev. I should have looked there in the first place. Do you know of an easy and cheap way of beading the ends? Thanks david

If you cant find a beading tool use a plumbers olive on the end of the pipe and solder it on. This stuff http://www.ebay.co.uk/itm/ALUSOL-ALU...item3f203b68f2 believe it or not will solder ali to brass if you get it clean and use the right flux. If there is any left over its worth having in the workshop for repairing ali casings.

Bob

wot he said
another alternative is thick copper wire wrap around twice and solder on to pipe