wishbone pre cut kits
 

Does anyone know where i can get laser cut wishbone kits like 3ge components used to do i really want to weld them myself someone mentioned vodou kits but i cant get emails through to them

Try HandyAndy, Talon or Saturn

They all make wishbones for Haynes builders so should all be in a position to supply you the appropriately cut steel ready for you to jig and weld.

Thanks for that :)

I'm pretty sure i have a rear set of pre cut wishbones that i had off ebay about 18 months ago, stuck up in the roof of my garage if your interested.

Terry

try talon :rolleyes:

If your interested... I have a full set of front and rear's poweder coated and including rear uprights.

I was keeping them for build no2 , but being made part redundant and having been told my injection pump on my Mondeo may be beaten to failing by the Dual Mass fly :eek: (Only had the car 3 weeks!) ... I may be pursuaded to sell.

TT

From experience i would say to give rouge engineering a very very wide berth, they are on ebay, competative prices, sh1t service. Like i say thats speaking from experience

Arfon

Thanks guys

I got mine from talon and was very happy with the quality :)

Have to say i got my sussy brackets from him and they were spot on, no probs! has had pages of good feedback too, no negative.

Everyone has a bad patch every now and again i suppose ;)

I too bought my suspension brackets and crush tubes from Rogue ( I think that's their name rather than Rouge but I could be wrong) and they were perfect and fast delivery to boot.

D.

I only got mine after ebay got involved and legal action was threatened, and I dont mean a couple of weeks I am talking months


Arfon

If you cant get the precut tubes then next best thing is to google tubemitre and download it to your computer then all you do is tell it what size tubes your using and what angle you want print it out quick it to the tube you want the fishmouth on and cut away

Been playing about with it for the last few weeks and it works quite well