Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)
-   -   Disaster strikes again (http://www.haynes.co.uk/forums/showthread.php?t=7761)

HandyAndy 23rd February 2012 03:56 PM

Disaster strikes again
 
In need of urgent help if anyone can help PLEASE:)

I,ve come to the conclusion that my 1800CVH engine is goosed, it appears the oil pump has failed BIG time & probably damaged the big end bearings & also no doubt knowing my luck lots of other bits too :mad:

My IVA is booked & so to save time I,m looking at replacing the whole engine rather than spend time ( I haven,t got ) & money repairing it I think it would be quicker & easier to just change the whole engine.

So.......if anyone has a decent CVH engine available then please get in touch, either to buy from you or even consider just to borrow ( get me thru the IVA test ).

AAAArrrrgggghhhhh this car is determined to test my patience :mad: :rolleyes: .

cheers
andy

K4KEV 23rd February 2012 04:31 PM

Hi Andy ....My sierra is still sitting in my garden with a 1.6 pinto in it if thats any good buy or borrow its up to you ...needs taking out of course but do have an engine crane.

twinturbo 23rd February 2012 05:35 PM

If Kev's no good then I will try and help out.

TT

shh120m 23rd February 2012 06:47 PM

Mark brought the engine crane back the other week, so you can borrow that andy.

carlknight1982 23rd February 2012 07:19 PM

Gus had one

mark 23rd February 2012 07:52 PM

I cant remember now as my iva was quite a while ago but dont you put the engine no. on the application? will fitting another engine cause you problems on iva day?

HandyAndy 23rd February 2012 08:11 PM

Cheers for your replies guys :)

Kev......thanks for your very kind offer, I,m hoping to swap like for like with another CVH but if I may can I put your offer of the Pinto as a "last resort" alternative please ? thanks mate .

TT......cheers mate, might be in touch subject to locating another engine .

Nath.....cheers mate, yes , that will come in handy as will no doubt need to swap engines.

Carl.....cheers for that , I,ve sent Gus a message so hopefully that might save the day .

Mark......yes I think it may cause me probs, but all I can do is contact them & explain the situation, hopefully they,ll understand & maybe let me carry on with the process although I,ll probably end up with a "Q" plate as i,ll be unable to confirm age of engine ( maybe ).

cheers also to Mike for an email of a possible engine available.

thanks guys.
Andy

mark 23rd February 2012 08:36 PM

You have to confirm engine age for your iva emmisions otherwise you will be tested on modern standards (so what ever you end up fitting get some proof of age)

Its dvla where you will get a Q if you use parts from different cars

Is it definately wrecked beyond help? ie no oil pressure and knocking its nuts off?!

HandyAndy 23rd February 2012 08:41 PM

Quote:

Originally Posted by mark (Post 70876)
You have to confirm engine age for your iva emmisions otherwise you will be tested on modern standards (so what ever you end up fitting get some proof of age)

Its dvla where you will get a Q if you use parts from different cars

Is it definately wrecked beyond help? ie no oil pressure and knocking its nuts off?!

Good point Mark , cheers :) ,

subject to what engine I can get hold of ( hopefully Gus,s ) which may help as will be able to prove engine age etc, tho could possibly also confirm the engine number on the Burtons catalogue etc. otherwise..... I may as well install a Zetec engine from the beginning etc , but that is more expense & hassle at this stage I could do without :o

The engine , sounds awful, sounds like 70,s diesel :eek: , not showing much oil pressure at all & sounds like a bag of hammers rattling around inside :mad: .

cheers
andy

mark 23rd February 2012 08:49 PM

someone on ebay 25miles from us is selling a 1.8cvh sierra with a 2.0lt zetec included on an engine stand as a project, no bids on it and it ends in 21hrs, maybe worth messaging him with a cheeky offer he can only say no!

Then you will have a cvh for iva, a few sierra bits to sell and a zetec for your upgrade

HandyAndy 23rd February 2012 08:52 PM

Quote:

Originally Posted by mark (Post 70878)
someone on ebay 25miles from us is selling a 1.8cvh sierra with a 2.0lt zetec included on an engine stand as a project, no bids on it and it ends in 21hrs, maybe worth messaging him with a cheeky offer he can only say no!

Then you will have a cvh for iva, a few sierra bits to sell and a zetec for your upgrade


Oooh Oooh, sounds like a plan :) do you have an ebay link or item number please Mark ?

I,ve been on ebay searching this afternoon & only seem to find 1.4CVH engines .

Sorry for asking ....been a long frustrating day :(


Edit.......just found the Ebay listing.

cheers
andy

twinturbo 23rd February 2012 09:10 PM

I was looking at that too.

Can't find it now LOL..

TT

ayjay 23rd February 2012 10:12 PM

YOu are welcome to come and wizz mine out of my car any time .Its up and running your need is greater than mine ATM. 1.8 cvh on pierburg everything circulating

HandyAndy 23rd February 2012 10:29 PM

Quote:

Originally Posted by ayjay (Post 70885)
YOu are welcome to come and wizz mine out of my car any time .Its up and running your need is greater than mine ATM. 1.8 cvh on pierburg everything circulating

Thankyou Ayjay , thats very kind of you to offer , its precisely what my engine is running as too,

but it looks like Gus,s engine sale will save the day http://www.haynes.co.uk/forums/showthread.php?t=7502y

Thats what is great about this forum......everyone always offering help to fellow members :cool:

I really appreciate all the offers of help, thanks guys :cool:

cheers
andy

ayjay 23rd February 2012 10:53 PM

Glad you are sorted
I hope Gus's engine solves the problem
Offer still open if things go avocado:D

Tatey 23rd February 2012 11:22 PM

Andy if you can't get that CVH for whatever reason I have my 1.8 Zetec you can borrow, with some ZX6R carbs, just waiting for my aluminium inlet manifold to arrive and then it should be sorted, except for the thermostat housing and megajolt. I've also got an engine crane now that you can borrow if needs be.

BORNXenon 24th February 2012 11:48 AM

Probably more hassle than its worth for you at this stage, (especially as you may be sorted) but I have a 2ltr Ecotec sat in the garage that was going to eventually be going in mine, however with the current prices of Sierra's I may be going the MX5 route so it will be surplus to requirements.

HandyAndy 24th February 2012 11:50 AM

Quote:

Originally Posted by Tatey (Post 70889)
Andy if you can't get that CVH for whatever reason I have my 1.8 Zetec you can borrow, with some ZX6R carbs, just waiting for my aluminium inlet manifold to arrive and then it should be sorted, except for the thermostat housing and megajolt. I've also got an engine crane now that you can borrow if needs be.

Thanks for the offer Simon, very kind of you :)

I,m buying Gus,s engine , just trying to arrange a courier now .
It,ll be a straight swap, like for like & will drop straight in on my engine mounts so in the long run will save alot of time not needing to make new mounts / exhaust manifold etc .

thanks to all for all the offers of help :cool:

cheers
andy

ozzy1 24th February 2012 12:01 PM

Good luck with the IVA test :)

twinturbo 24th February 2012 12:21 PM

Very best of luck Andy, I know this means a great deal to ya.

TT

HandyAndy 24th February 2012 08:14 PM

Thanks Ozzy & TT :)

Yes, i,m looking forward to be able to take the car to the end of my road & carry on going , it,ll be a nice feeling to lock the garage up without the Roadster being inside it :cool:

cheers
andy

HandyAndy 8th March 2012 10:59 PM

I,d like to thank "Gus" for saving the day for me with regard the engine package he had for sale,......

I confirmed with Gus that I would have his engine on the friday, it was despatched to me on monday & delivered to my garage on wednesday.....really quick turn around ....thanks for that Gus :cool:

The engine has been installed & it runs like a dream, started on first turn of the key once the fuel pump had got fuel to the carb....well chuffed.

I,ve now driven it & I,ll be totally honest, it ( the engine ) is soooooooo much better than my original, smoother & quicker to pick up the revs ( I know its only a CVH engine but so much better than my "sick" original engine).

I,d like to publicly thank all the forum members who offered me their engines / or use of ......Thanks guys :cool: A great forum spirit of help .

Also to thank Spud for helping me "jiggle":D the new engine in ( jiggle as in getting it on the gearbox shaft ),

& to Nathan at NTS for the use of the engine hoist.

Watch this space now, as the car is ready for test ;)




cheers
andy

SeriesLandy 8th March 2012 11:14 PM

Great to see you got the enging sorted.
We just need some 42 year old pics of the finished car.
Best of luck with the test whenever that will be.

vmax1974 9th March 2012 08:17 AM

Endgame approaching for you good luck with the test

HandyAndy 9th March 2012 02:24 PM

here,s a few pics showing the engine transplant & a pic of the finished car

old engine out


empty engine bay


new engine going in


finished car


cheers
Andy

mark 9th March 2012 02:48 PM

Looks good Andy

Dont know when your test day is but do you think you will make it to the track day on 10th April if you pass?

Tex from on here has already booked and im definately booking come the end of the month, so is my brother too

HandyAndy 9th March 2012 03:18 PM

Quote:

Originally Posted by mark (Post 71210)
Looks good Andy

Dont know when your test day is but do you think you will make it to the track day on 10th April if you pass?

Tex from on here has already booked and im definately booking come the end of the month, so is my brother too


Cheers Mark :)

To be bluntly honest with you......as much as i,d like to do the track day....I,m skint . IVA test etc etc , I,m just really pushing hard to get the car tested/passed & registered in time for Stoneleigh, thats my goal/target at the mo.

I,ll come down to the track day tho & watch / blag a passenger ride in yours too pleeeeease :cool: .......

I,ve been out in Tex,s car & that IS quick too......

cheers
andy

twinturbo 9th March 2012 05:37 PM

That's Excellent Andy..

I guess your laptop troubles are sorted too :) .

Need some motivation myself, hopefully in the next 3-4 weeks things in life will have settled and I will be more positive ...


GOOD LUCK!!!

TT

mark 9th March 2012 07:06 PM

Quote:

Originally Posted by HandyAndy (Post 71212)
Cheers Mark :)

To be bluntly honest with you......as much as i,d like to do the track day....I,m skint . IVA test etc etc , I,m just really pushing hard to get the car tested/passed & registered in time for Stoneleigh, thats my goal/target at the mo.

I,ll come down to the track day tho & watch / blag a passenger ride in yours too pleeeeease :cool: .......

I,ve been out in Tex,s car & that IS quick too......

cheers
andy

Yeah I know what you mean, IVA, insurance, tax and registration fee comes to a good chunk of dosh

But you soon forget about that once you screw your number plates on and blast down the road for the first time!

tex 31st March 2012 03:11 AM

Quote:

Originally Posted by mark (Post 71217)
Yeah I know what you mean, IVA, insurance, tax and registration fee comes to a good chunk of dosh

But you soon forget about that once you screw your number plates on and blast down the road for the first time!

Sure i can keep you a seat andy... :o)

glad your engines sorted mate.. gutted for ya but on the flip side... it went before you were miles down the road stranded.. that would of made you grind your teeth and make you think... TITANIC...

did you get the wheels aligned? sort brakes?


All times are GMT +1. The time now is 03:44 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.