Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   Fuel level sender (http://www.haynes.co.uk/forums/showthread.php?t=12742)

KenK 23rd June 2013 11:29 AM

Fuel level sender
 
Just doing the dreaded wiring at the moment which has made me consider a fuel guage. I bought a tank from Kev several months ago but never thought about a fuel guage at the time. How many people have done without them?

If I do decide to fit one I will need to cut a hole in the tank to fit the sender unit, any suggestions as to how to fix it in?

Cheers
Ken

K4KEV 23rd June 2013 11:47 AM

Hi Ken.....blind rivnuts and nitrile gasket or large o ring ....if you use ordinary rivnuts then a small o ring for each bolt, make sure you choose the larger side of the tank for a sender and just bend or shape the float to give max and min travel

jason 82 23rd June 2013 12:28 PM

Hi Kev, was it you that was selling the new roadster tanks on this forum a few months ago please ? Just looking for one now, and I can't remember who was selling them.

K4KEV 23rd June 2013 02:08 PM

you have pm Jason

sparkybagnall 23rd June 2013 06:21 PM

id be interested in some info on the tanks to please

KenK 25th June 2013 12:43 PM

Kev

Thanks for the speedy reply. Sounds easy enough but next stupid question! what do you mean by the "larger side of the tank"?

Ken


All times are GMT +1. The time now is 07:53 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.