Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   Tr5 (http://www.haynes.co.uk/forums/showthread.php?t=13079)

Numplumb 24th December 2013 02:29 PM

Tr5
 
Hi everyone Merry Christmas to you all, I've a question tr5 gets in the way of the fitting of a 1600 MX5 engine looking at other threads on here it seems that they are not fitting tr5 is it needed? And if not what if anything is required instead? Looks like some have used diagonals like tr6 & tr7 at the rear is that a good idea? Also I have a nose cone from Equinox which is higher and it's very close to the engine in fact at the moment with the engine slightly to far forward and sitting on Phil's engine mounts which are great. Its to high for the bonnet to clear, anyone got any suggestion

Regards Mick.

voucht 25th December 2013 12:09 PM

Hi Mike,
I don't know if it will be sufficient to answer your question, but there has been some talks about TR5 already here:
http://www.haynes.co.uk/forums/showthread.php?t=12877

Numplumb 25th December 2013 10:21 PM

Thanks for that,that clears up my thoughts, I will be cutting it out after Christmas and doing those cross bracings Merry Christmas voucht

Regards Mick.

Doogle 27th December 2013 10:01 PM

Cutting up a TR5, theyre worth good money these days.. :confused:

TalonMotorFabrication 27th December 2013 11:00 PM

Ohh so many jokes so little time....


All times are GMT +1. The time now is 08:25 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.