Could somebody do me a favour
 

Hi all

Could somebody who has a good local nut and bolt man get me a pair of the long plain shank bolts for the rear lower wishbones and post em up to me since evrywere neer me ither aint got em or i need to buy a box of 50 then i can paypal you how evry many bear tocans it is.

chears

tilly

Have you thought about using stainless or steel studded bar? It's what I used. Do you also need it for the differential mount?. I have some of each although although the stainless was more expensive. I put the remainder of the stainless pack on ebay last year but nobody wanted it. May have a bit of steel bar on the shelf already machined to size. Can look at the weekend if its any help?

Thanks for the offer spike but i really dont want to use stud bar, would much prefer a plain shank bolt.
thanks
Tilly

Try -

http://www.shop4fasteners.co.uk/

none problems, its all 8.8 tensile, Don't look a given horse in the mouth

I thought that and bought the length bolts I thought I needed, however they were too short as I forgot about washers and they cost over £6 a bolt.
In the end my local shop didn't do one long enough (about 250mm if I remember correctly) so I had to use some HT studding, cost about £3 for a m.

Hi,I got my bolts from allfix cost just over a fiver there was someone on here with a couple of spares ill have a look to see who it was Ray

ok it was Dogwood that had them got them from some place in gravesend is that anywhere near you? check my earlier post "rear lower outer wishbone bolt"

try
www.bapp.co.uk
not sure about quantities etc but there is a branch near you

Andy

adrian
please can i have (4) of those bolts at cost and postage please :)
cheers les g