Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   Por 15 (http://www.haynes.co.uk/forums/showthread.php?t=3312)

Peter-C 22nd December 2009 11:12 AM

Por 15
 
Has anyone used POR 15 to paint their chassis ? If so, does it need a primer ?

Peter

dan_g8 22nd December 2009 11:47 AM

im planning to por15 my chassis. you probably know this but to use por15 you need to marine clean it (or use something else to degrease & clean the metal), metal ready it, then you need an undercoat and then a top coat.

The metal ready acts as the primer by etching the metal which will make the under coat stick.

dan

Vedde 18th January 2010 11:19 AM

I used Por 15 on my chassi, with the appropriate Marine Clean, and Metal Ready as under treatment. I painted it straight on the chassi without any undercoat and it turned out FAB and cheaper than a powdercoat.

/Fredrik

Aussie Haynes 18th January 2010 11:23 AM

POR15 IS an undercoat! It works better if it's painted over a surface that's lightly rusted. My experience is that it peels off when painted on shiny steel. It needs a top coat to prorect it from UV.
Regards,
Mike.

GraemeWebb 18th January 2010 01:04 PM

As I do not have a compressor can you brush paint it? If you can what sort of finish would you get.

Peter-C 18th January 2010 01:49 PM

top coat
 
Can you use any type of paint as a topcoat, eg ordinary household gloss.

Cheers

Peter


All times are GMT +1. The time now is 12:46 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.