Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   Handbrake Circlips (http://www.haynes.co.uk/forums/showthread.php?t=3796)

Spikehaus 6th March 2010 07:45 PM

Handbrake Circlips
 
I had a look at what I would need to fit my handbrake cable today. The new Sierra cable did not come with any circlips, any idea what I require? Are standard circlips ok?

I could also do with a photo of the handbrake cable adjuster connections and how you secured & connected the cable back together.

miker 9th March 2010 10:15 AM

I thought i'd post on here to keep this near the top - i'm looking for the same answer. At the moment i've taken a normal circlip, stretched it a fraction (it wouldn't fit) and used that temporarily.

Any idea of how big the clip should be (i'm no where near the car and as i recall it didn't seem a standard size)

ozzy1 9th March 2010 11:00 AM

A standard external dia circlip should fit.
The pin dia is 6.5mm in the groove and the slot thickness is 1mm.


All times are GMT +1. The time now is 03:52 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.