Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Announcements (http://www.haynes.co.uk/forums/forumdisplay.php?f=2)
-   -   FS: 2l Pinto and T9 Gearbox (http://www.haynes.co.uk/forums/showthread.php?t=4298)

SeriesLandy 19th May 2010 01:36 PM

FS: 2l Pinto and T9 Gearbox
 
I have for sale a 2.0l pinto which came out of a ford p100 pickup truck. The engine had 20 stamped on the side so not a 205 block.

The truck had done roughly 90,000 miles and was G reg.
When it was removed it was running but has been sitting for a few months on a pallet outside under a tarp.

There is a problem with the gearbox where 1st wouldn't work however when it was running before I removed the engine 1st worked.

Included in the sale is engine, gearbox, gearlever, alternator, leads, plugs and inlet manifold if I've still got it (auto choke stuck a bit).

I can't guarantee that the engine will work but they are pretty indestructible.

Looking for £100 ono and situated in Horndean near Portsmouth.


Any questions please contact me via pm.


All times are GMT +1. The time now is 06:38 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.