Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)
-   -   Ebay chassis packs or any other suggestions. (http://www.haynes.co.uk/forums/showthread.php?t=4637)

ChrisJ 18th July 2010 09:47 PM

Ebay chassis packs or any other suggestions.
 
Hoping to purchase a chassis pack fairly soon,

I've seen a few on ebay but was wondering if there were any recommended people/companies on here?

Thanks all

Chris

David_17 18th July 2010 09:51 PM

HandyAndy is your man ;)

dan_g8 18th July 2010 10:11 PM

Talon motorsport. They do flat pack chassis packs or fully welded chassis (plus lots of other bits). i have always been very happy with the service i get from phil (talonmotorspot) and he always goes the extra mile.

John Marchant 18th July 2010 10:15 PM

Handy Andy has proven to be more than just a seller of flat packs. Couldn't recommend him highly enough.

rpjg1975 18th July 2010 10:46 PM

Hi
I got my original chassis from a company no longer in business but would recommend both the andys at saturn and john at 3ge.
Russ

Enoch 19th July 2010 08:20 AM

I bought mine from Handy Andy / Saturn, one of the best moves I made. Not just because it was a bargain but because the support and help from Andy Saturn added a huge amount of value to my purchase.
Enoch

ChrisJ 19th July 2010 10:16 AM

Quote:

Originally Posted by dan_g8 (Post 41769)
Talon motorsport. They do flat pack chassis packs or fully welded chassis (plus lots of other bits). i have always been very happy with the service i get from phil (talonmotorspot) and he always goes the extra mile.

I have seen this company on ebay and was one i was considering.

I assume this is handyandy?

http://www.saturnsportscars.co.uk/st...iewCat&catId=8

I'll send him a message.

Thanks all for your recommendations
:)

SeriesLandy 19th July 2010 10:16 AM

I would recommend handy Andy and saturn. Going way more than the extra mile. Couldn't be more helpful when I had a problem with the bits I had.

I've Also used 3ge for all my plates and wishbones. They were also very good quality.

ChrisJ 19th July 2010 05:40 PM

Hi, thanks all for your suggestions,

I have made contact with HandyAndy today and he just needs to know which gearbox and rear tub i'll be using.

I just need to do some research now :)

Thanks again

flyerncle 19th July 2010 07:35 PM

Talon and Andy are two different people,and the attention to detail and help from Andy are second to none.


All times are GMT +1. The time now is 12:37 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.