Haynes Forums - Wishbone tube wall thickness

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)

- - Wishbone tube wall thickness (http://www.haynes.co.uk/forums/showthread.php?t=4642)

Sbrad

20th July 2010 08:18 AM

Wishbone tube wall thickness

Morning all,

Can anyone tell me what the wall thickness is for the tubing (Ø25 & Ø19) which is used on the front & rear wishbones please? I've had a look in the book and unless i've missed it i'ts not there.

Thanks

sbrad

Talonmotorsport

20th July 2010 08:25 AM

lower wishbone tubing is 25x2mm or 1"x14gauge CDS upper tube I use 19x2mm or 3/4x14gauge CDS both are mechanical grade Cold drawn seamless.

Sbrad

20th July 2010 10:20 AM

Thanks for your help

All times are GMT +1. The time now is 04:07 PM.