Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Engine/transmission (http://www.haynes.co.uk/forums/forumdisplay.php?f=6)
-   -   sump confusion (http://www.haynes.co.uk/forums/showthread.php?t=4694)

james3004 26th July 2010 11:46 PM

sump confusion
 
I received a cvh sump from dezee today, thanks m8 :)

The problem is that i now realise that cos i'm using the mt75 box the zetec sump and cvh one already sit level with the bottom of the gearbox:confused:

So I'm now wondering what to do, i could just use the standard zetec one, but the cvh one is sightly shorter (but the bump appears to be at the fly wheel end instead of the belt end, which isn't a big problem if i choose to mod it), or do i just raise the engine up in the bay?:confused:

big_wasa 27th July 2010 08:51 PM

Or you could hack some of the bottom of the box....



That will make the sump the lowest part again.


All times are GMT +1. The time now is 10:06 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.