Nose cone drawings
 

Hi all.
Does anyone have cad drawings for the Haynes nosecone? I want to fabricate it in aluminum and would like to construct a plywood buck to build it.
Thanks in advance.
Pictures of my build are posted at grichtler.blogspot.com

CAD-file available on request
 

Hello,

I've digitised the "FabbyGlass-parts" a while ago and made CAD-files of these parts (nose cone, scuttle,wheel arches front and rear)
Quite a few people have asked and received the files.
If you send me a mail I'll you can have the files.
DWG ? IGES ? STEP ? STL ?

Nose cone drawings
 

Thank you for your reply Hoibi.
My email is grichtler@msn.com

I will keep the forum posted of my progress
Cheers
Gunter

Nose cone drawings
 

I neglected to give you my preferance in file format. If possible please send them in dwg or dxf.

Thanks again
Gunter

nose cone drawings
 

hi does anyone have a nose cone mold drawings that i could use to make my own nose cone and if so could it be posted please!!!

Nose cone drawings
 

anyone please ?:confused:

Hoybi's 3D model takes around 15 MB in IGES format, so it's not trivial to just post it. Drop me your email and I'll send it to you.

nose cone drawings
 

hi thanks alot this is my email rjt.correia@gmail.com

Nose cone drawings
 

Hi alga how you i see that you a 3d drawings of a nose cone i was wondering if you could PLEASE email it to me if you don't mind that is my email is rjt.correia@gmail.com:)

Hi.

This is nose number three on my Locost +4. (please don't ask about 1 & 2)

Sorry, no drawings. I made the plywood buck on the car.
There then followed several weeks of head scratching, but it was worth it in the end.

Paul G