Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)
-   -   front botton arm mesurements (http://www.haynes.co.uk/forums/showthread.php?t=5089)

thwang 26th September 2010 08:40 PM
front botton arm mesurements
 
hi all
whats the over all diamentions for the front bottom arms i.e/: from the tip of the bottom ball joint to the out side of the bush tube. the reason i ask my jig been thrown in the skip lucky i,d tacked the 5mm plate and tubes up i havnt the book at hand ive loaned it out.
si

Trif 26th September 2010 10:30 PM
Quote:
Originally Posted by thwang (Post 45656)
hi all
whats the over all diamentions for the front bottom arms i.e/: from the tip of the bottom ball joint to the out side of the bush tube. the reason i ask my jig been thrown in the skip lucky i,d tacked the 5mm plate and tubes up i havnt the book at hand ive loaned it out.
si
The book dimension is from the outer edge of the 5mm plate to the centreline of the bush tube and is 442mm
Trif


All times are GMT +1. The time now is 09:36 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.