Haynes Forums - fitting the trackrod ends to the sierra front hub

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)

- - fitting the trackrod ends to the sierra front hub (http://www.haynes.co.uk/forums/showthread.php?t=5305)

misty

28th October 2010 04:49 PM

fitting the trackrod ends to the sierra front hub

have a prob fitting the trackrod ends/ balljoints to the sierra front hub as they wont go all the way in. there seems to be a collar on the joint and it will not fit in to the sierra hub . i dont want to hammer it in but dont know any other way unless i drill out the holes

any ideas welcome

twinturbo

28th October 2010 05:15 PM

If You have sierra track rod ends, and sierra hubs.

Should go fine, they are tapered so they pull together a bit.

TT

All times are GMT +1. The time now is 03:31 PM.