Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   Bodywork and interior (http://www.haynes.co.uk/forums/forumdisplay.php?f=8)
-   -   Left over trim etc. for sale (http://www.haynes.co.uk/forums/showthread.php?t=5306)

drury318 28th October 2010 05:40 PM

Left over trim etc. for sale
 
I have quite a lot of stuff left over from my build just gathering dust.
Broadly speaking there`s the following:
4.5m x 20mm corrogated loom wrap
6m x 15mm corrogated loom wrap
6m x 10mm corrogated loom wrap
6m x 15mm plastic loom sheathing
7m x 12mm plastic loom sheath
3.5m x 10mm plastic loom sheath
Approx 8m of various edging trims
0.7m of pedal tape ( sticky back emery type stuff)
A couple of small bags of various nut covers
Literally 100`s of black plastic P clips in all sizes (gave up counting, there`s too many! )
All decent stuff, mainly from Vehicle wiring products or CBS.
I just want to get rid of the lot really so if anyone`s interested I was looking for £30 posted for the lot, Dennis

twinturbo 28th October 2010 05:45 PM

Ooohhhh..

Mmmm...

twinturbo 28th October 2010 05:53 PM

Will put in an offer that your welcome to reject of £25 and anyone who is happy to pay more, is more than welcome to jump in and I will not be upset.

Just a little budget concious this fortnight as new shox and body is going to be orderd :eek:

TT

HandyAndy 28th October 2010 06:14 PM

:o
don,t suppose you have approx 12 inches of rubber fuel hose kicking about do you? ( from the tank to the aero filler cap ).

cheers
andy

drury318 28th October 2010 06:16 PM

I`ll have a look in a bit Andy,

HandyAndy 28th October 2010 06:19 PM

Quote:

Originally Posted by drury318 (Post 47711)
I`ll have a look in a bit Andy,

cheers Dennis , i,ll check the size I need in a min ( with my car at the mo)

cheers
andy

drury318 28th October 2010 06:42 PM

Quote:

Originally Posted by HandyAndy (Post 47712)
cheers Dennis , i,ll check the size I need in a min ( with my car at the mo)

cheers
andy

Andy, I have a piece 10 inches long, it`s from CBS & it`s like convoluted stuff with a spiral of wire running thru` it. It`s approx 52mm I.D. but it`s not really very flexible & it has NO markings on it for IVA. It came with a letter from the supplier stating it was suitable for fuel, unfortunately I don`t have the letter any more but to be honest the tester never questioned it anyway.
Any good? Dennis.

HandyAndy 28th October 2010 06:51 PM

Quote:

Originally Posted by drury318 (Post 47714)
Andy, I have a piece 10 inches long, it`s from CBS & it`s like convoluted stuff with a spiral of wire running thru` it. It`s approx 52mm I.D. but it`s not really very flexible & it has NO markings on it for IVA. It came with a letter from the supplier stating it was suitable for fuel, unfortunately I don`t have the letter any more but to be honest the tester never questioned it anyway.
Any good? Dennis.

ooooh oooh yes please, that will fit the aero filler end nicely, i,ll then get a reducer to connect it to the tank neck :)
How much please Dennis?

cheers
andy

drury318 28th October 2010 07:22 PM

Andy, you have a PM, cheers

HandyAndy 28th October 2010 08:51 PM

Quote:

Originally Posted by drury318 (Post 47719)
Andy, you have a PM, cheers

Cheers Dennis......
PM replied to :)

cheers
andy


All times are GMT +1. The time now is 11:48 PM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.