the floor
 

I have the floor fitted with lots and lots of pop rivets
can i fit ie 3/4 mdf in the inside of the car or should i just fit all on the metal floor?

If you mean you need something to bolt the seat to, use some metal strip of say 50x3mm across the floor from chassis rail to chassis rail.

And use large washers to spread the load for Mr IVA.

Dont understand the need to use wood.

Don't put MDF anywhere near a Roadster.

TT

ok will do steel to steel no wood of any kind
hey many thanks

MDF and water no go..........:eek:

mdf and everything no go, worst material ever

Never was good with wood and have no intension of trying,metal is my God.:cool:

Curiously, in astrophysics any element other than Hidrogen and Helium is called a metal :)

I rest my case Albert ;)

Why not use fibreglass honeycomb.......strong as yer like and weighs beggar all.

wood is for woody folk steel is not for car floors as it rots so use ally;)