Haynes Forums - Crush tube length

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Chassis (http://www.haynes.co.uk/forums/forumdisplay.php?f=4)

- - Crush tube length (http://www.haynes.co.uk/forums/showthread.php?t=5620)

rapidtornado

1st January 2011 08:26 PM

Crush tube length

All pretty sure on this but just checking crush tube length is 35mm? didn't know if it should sit marginally proud or recessed.

Sorry for the DAQ :confused:

Rapid

Talonmotorsport

1st January 2011 09:06 PM

Just to be clear the crush tube is the part that goes inside the polybushes, has the bolt pass through it and gets clamped by the suspension bracket. This part should be stainless steel and 44mm long. The 33.7 OD bush tube that the poluybushes go in are 35mm long.

rapidtornado

1st January 2011 09:11 PM

Thanks for clarifying, much appreciated!

Rapid

All times are GMT +1. The time now is 11:48 PM.