project/parts for sale i have to save for a wedding so my project will have to end
 

i will be selling,

1 armoto cnc'd wooden wishbone jig for making your front and rear wishbones, unused so not burnt £15
2.0 zetec silver top engine f rom a 1997 mondeo £100 (bare)
1.8 cvh engine bare (stamped 1991) from f reg sierra (req cambelt & tensioner) £100
7.5" diff from a 1991 sierra with bolt on type shafts £60(used)
7" diff from f reg sierra 1.8 push in type shafts £60 (used)
mk2 escort standard steering rack (recon) £50
1 pair of modified uprights (new) £80
1 set of gsxr 600 srad carbs £40(without trumpets & flanges )
1 pair of front vented type brake calliper's (new ap locheed) and discs for sierra 1.8 f reg (new/stored ap locheed) £100
1 steering columbs with steering wheels from sierra £50
full sierra wiring loom with fuse box £30
1 pair of push in used half shafts( f reg 1.8 cvh 7" type) £40
1 pair of bolt on used halfshafts (j sierra 2.0 dohc 7.5" type)£40
1 unfinnished chassis with all the plates and diff brackets,and u brackets (some welded some tacked on) £200
1 willans race harness with groin straps etc fia approved (out of date for racing use) £50
1 propshaft (mt75 split type) £25
1 front suspension jig from saturn sc £50
1 f reg sierra servo with master cylinder fluid resevoir and top with switch £25
1 f reg sierra rear brake valve £5
sierra coolant bottle £10
cvh inlet manifold with carb £20
cvh exhaust manifold £10
few other bits and bobs just ask



i live close to junction 1 of the m60 (stockport) if anybody wants to make me a sensible offer for the lot or any of the bits please pm me

buyer pays postage or collects
i started this project with good intentions but getting wed etc is more of a priority in the future wifes eyes

ps i have a 1.8 cvh (£100) on a which needs the cambelt and tensioner changing, the engine was a reconditioned unit 2 years before i got the first donor vehicle i removed it to check the condition of the water pump etc which felt rough so i left the engine timed up but didnt fully fit the bits as i had the intention to fit new parts, then i got a zetec and changed my mind.

i thought id give you guys a chance before i put bits on ebay

I don't need any of those bits myself, but I think you would do a lot better to put the prices you want on the parts, rather than wait for 'sensible offers'. It's a bit more work, I know, but I expect it will be worth it.

I have sent pm

Megajolt please
 

Sorry to hear you are selling-up and congratulations on your fourth coming marriage. A car build can be postponed but a good woman needs to be snapped up immediately!

I'll take the:

1 megajolt tps type ecu & loom (tested on laptop and it works when powered and accepts a map but not been on a car yet) £100 or £150 with coil pack & edis unit.

The full monty with the coil pack and EDIS please.

PM me with details of how you want paying, etc.

Thanks,

I will have the wishbones if you could send me your details for payment

I would love the rear calipers and disc's.
But i have to had to pay for my daughters wedding tomorrow. if they have not gone within the next couple of weeks i will have them off you.

Terry

ps. can you find out a p&p for these please

shocks
 

Hey, thats a lot of gear you are having to shift, shame you are abandoning.

I am up for the shocks, can you give more info i.e. condition?

Cheers, Joe.

kenk
 

check your pm

if the shocks and transit drag links are new I'll take them

Cheers
Rapid

Sorry Joe, didn't read your post... you were obviously first dibs on the shocks... :)