Haynes Forums - Pedal Box from 3GE

Haynes Forums (http://www.haynes.co.uk/forums/index.php)

- Running gear (http://www.haynes.co.uk/forums/forumdisplay.php?f=5)

- - Pedal Box from 3GE (http://www.haynes.co.uk/forums/showthread.php?t=5979)

Ashtonr

28th February 2011 01:08 PM

Pedal Box from 3GE

Hi, has anyone else used the pedalbox plate from 3GE and then found the Sierra Master Cylinder is too big for the pre drilled holes ? If so any idea what master cylinder has it was designed for ?

Talonmotorsport

28th February 2011 01:15 PM

The smaller sierra master cylinder, not trying to be funny but there is two types. Got a half round file and an hour to kill?

SeriesLandy

28th February 2011 01:26 PM

Quote:

Originally Posted by Ashtonr (Post 54131)

Hi, has anyone else used the pedalbox plate from 3GE and then found the Sierra Master Cylinder is too big for the pre drilled holes ? If so any idea what master cylinder has it was designed for ?

I tack welded a piece of angle iron to the back and made the hole the right size with a hole saw. Took all of 15mins to do.

Ashtonr

28th February 2011 01:51 PM

Ah that makes sense, I thought it must have been designed for an after market cylinder or simular

Thanks will get the file out

All times are GMT +1. The time now is 09:16 AM.