Suspension Bits
 

I'm looking at sourcing my suspension bits and the best deal I've managed to find is from rally design. Can anyone confirm that these are the right parts for the roadster?

RS 2000 TRACK ROD END
http://www.rallydesign.co.uk/product...ucts_id= 7332

Steering Rack Extensions
http://www.rallydesign.co.uk/product...cts_id= 14661

Maxi Ball Joint
http://www.rallydesign.co.uk/product...ct s_id=11839

Drag Link
http://www.rallydesign.co.uk/product...ct s_id=11838

Bushes
http://www.rallydesign.co.uk/product...ct s_id=11836
or
http://www.rallydesign.co.uk/product...ct s_id=11844

Rally design polybushes are PB122 how ever the crush tubes are 2mm too long and will need to be turned down on a lathe. I've seen a set that have been attemped to be done with a hacksaw which will make them fit for the bin.

Ah not really worth getting the bushes from them then. Know of anyone else that does the bushes besides Saturn?

whats wrong with ordering them from saturn? good quality and good price, I got mine from 3ge before they shut down, but i would have got them from saturn had they been going at the time.

bush set on ebay?
 

http://cgi.ebay.co.uk/ws/eBayISAPI.d...STRK:MESELX:IT
Set for sale here that may be of interest? could save a few quid
Joe.

If the bush tube is too long can not the brackets just be made 2mm wider?

Yeah they can but remember these bushes wear out so you are better off using what is readliy available and keep things like the brackets as per the book.