Haynes Forums

Haynes Forums (http://www.haynes.co.uk/forums/index.php)
-   General discussion (http://www.haynes.co.uk/forums/forumdisplay.php?f=10)
-   -   Reamer size (http://www.haynes.co.uk/forums/showthread.php?t=6296)

Deanno 14th April 2011 08:16 PM

Reamer size
 
In work i have access to loads of reamers and they have told me if i find one i can use it no problem so i was wondering if possible i could get a few measurments?

overall length
diameter at top
diameter at bottom


many Thanks in advance
Dean

flyerncle 14th April 2011 08:35 PM

What you reaming would be a great clue.

Only reamer you needs is for lower ball joints in the front uprights.

Deanno 14th April 2011 09:05 PM

Sorry, the front lower ball joints.

Would help:D

flyerncle 14th April 2011 09:09 PM

There is one doing the rounds on the forum Dean,cant for the life of me remember the size but someone will be along and sort it .

brainbug007 14th April 2011 09:16 PM

I'm pretty sure its one of these 19mm ones. http://www.axminster.co.uk/axminster...mer-prod23107/

flyerncle 14th April 2011 09:23 PM

Thats the one ;)

Andy_B 15th April 2011 11:05 AM

I posted a brand new one to ROBTRALOU he should be done with it by now and said he would post it on ...

Deanno 15th April 2011 01:47 PM

its ok George newman said i can borrow his its just that i thought if someone knows the size i can get one from work.

cheers anyway.


All times are GMT +1. The time now is 10:48 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.