Looking for a Banjo fitting
 

I am on the look for a Banjo fitting for my new fuel pump..the outlet is 12mm and i am using 10mm hose...i can find plenty on the bay for 8mm hose but nothing for 10mm...i know i could join to hoses but thought it would be better with as less joints as possible...anybody got any links ??

BTW its a 2.0 injection setup

Make of fuel pump?Are you sure its 12mm metric not npt etc.
Internal or external thread?


www.europaspares.com
www.rallydesign.co.uk
www.burtonpower.com

This is a link to the pump

http://cgi.ebay.co.uk/SYTEC-LINE-FUE...item5d2ebb9a68

are you sure it's a metric fitting ?.....could be a bsp ;)

Could you not change the banjo stub for a push on fitting if you can't find the right size??

Theres a thought....the stub looks to have a spring of some sort in it ...so i was a bit weary about removing it incase it went POP ...do you have any idea what its for ?

In the pic it looks like its got 2 outlets, one where the screw thread is and one where the holes are for the banjo. Ive not seen one like it. Normally the bolt has a channel down the centre and a hole coming out the side.

that looks like a mk1 golf fuel pump :rolleyes:
hmmm i wonder

Take it to a company like BSP or Pirtek etc, a decent hydraulics firm should be able to sort you out.

I did....they (pirtek) couldnt...think they were a bit bamboozled with what i needed...i have ended out sorting a 1/8th NPT to 10mm hose outlet from Europa parts....hopefully that will do the trick !!